Accessories for solar street lights

smart city ready - Erweiterung

LS-MCR

Zhaga Sockel 4 Pin oben oder unten am Leuchtenkopf mit Abdeckung inklusive D4i Treiber. Passend für die Lento Straßenleuchtenreihe. Artikelnummer: LS-156

€95.20*

* Preise inkl. MwSt. zzgl. Versandkosten

Surcharge for 1-10V dimming option

M-DIM10V

Aufpreis für einen 1 - 10V dimmbaren Treiber im Leuchtenkopf

€34.51*

* Preise inkl. MwSt. zzgl. Versandkosten

Surcharge for DALI dimming option

M-DIMDALI

Aufpreis für einen DALI dimmbaren Treiber im Leuchtenkopf

€34.51*

* Preise inkl. MwSt. zzgl. Versandkosten

Surcharge for automatic midnight dimming

M-DIMMID

Surcharge for an integrated timer dimmer, light reducing after midnight.

€34.51*

* Preise inkl. MwSt. zzgl. Versandkosten

PV Modul Halterung verstellbar

M-SOL76

Für Module bis 670mm Breite geeignetLieferumfang: 2 x kurze Stützen (Vorderseite) 2 x lange Stützen (Hinterseite) 4 x Gummiauflagen (110*42mm) Edelstahlschrauben (8 x M6,3*80mm Sechskant-Schrauben)Abmessungen: 56 * 12 * 9cm

€58.31*

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast Unit 24V MH, HPS 35W

VG-035-DC

Ballast for DC or battery operation of sodium, MH metal halide or ceramic lamps 35W.Operating voltage 24V DC (short time 20V ... 30V DC)Current consumption: 1.72 amp (24V)Ambient temperature: -40°C ... +65°C.Ignition voltage 4.5 kVMetal housing openDimensions: l 110mm, w 110mm, h 50mmProtection degree - only for use in casings or lighting fixtures

€64.26* €128.52* (50% saved)

* Preise inkl. MwSt. zzgl. Versandkosten

Control Gear MH 35W w. box

VG-035K

Magnetic ballast for e.g. recessed ceiling luminaires.For HQI, HIT, CDM or sodium vapour lamps with 35W rated wattage.Incl. igniter.Access via 3-core cable with open ends,Lamp outlet via 3 individual cables.Fine-wire fuseTemperature cut-off,Operating voltage 220 - 240V 50HzProtection class: IP40 fully insulated - for indoor use onlyMark of conformity: F, CE, ENECDimensions: 143 x 122 x 62mm

€47.60*

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast Metal Halide HPS 50W 12V-24V

VG-050-24

To operate sodium, MH metal halide or ceramic lamps 50W in car, truck, boat or solar light.Small and rigid design.The unit must be mount on a heat-sink or on a metal housing, to reduce the operating temperature.Operating voltage 12V DC ... 24V DC (short time 10V ... 30V DC)Current consumption: 5 amp (12V), 2.46 amp (24V)Ambient temperature: -40°C ... +65°C.Ignition voltage 4.5 kVMetal housing hermetically closedDimensions: l 110mm, w 72mm, h 34mmProtection degree IP 66

€66.05* €132.09* (50% saved)

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast 1000W for Xenon Lamp

VG-1050

Only suitable for xenon bulbs. Supply voltage 220 - 230V/ 50Hz Lamp voltage: DCSturdy sheet metal housing Protection class IP00 for installation only Dimensions: Approx. 250 x 140 x 80 mm

€514.08*

* Preise inkl. MwSt. zzgl. Versandkosten

Ballast Box 1000W for HQI NAV Lamp 10A

VG-1095-10

Choke and compensation capacitor in waterproof housing.Optimised for Osram or Radium lamps.Connected voltage 230V/ 50HzOptionally available:Lamp current 8.2A (for metal halide lamp) or 9.5 - 10.3A (for sodium vapour lamp)Max. permissible length of connecting cable to the spotlight: 20mPlease order igniter separately.Sturdy protective housing splash-proof, greyProtection class IP 65Dimensions: 480 x 130 x 140 mm

€384.37*

* Preise inkl. MwSt. zzgl. Versandkosten

Supply unit 2000W for HQI IP65 8.8A

VG-1097-8

Choke and compensation capacitor in waterproof housing.Optimised for Osram or Radium lamps.Supply voltage 400V/ 50HzLamp current: 8,8A or 10,3AMax. permissible length of connecting cable to headlamp: 50m.Please order igniter separately.Sturdy protective housing splash-proof, greyProtection class IP 65Dimensions: 480 x 130 x 140 mm

€559.30*

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic ballast for metal halide 150W

VG-150E.Osram

Variante: Osram | Colour: Osram

Flicker-free light. Energy-saving and negligibly low reactive current.28% energy saving compared to conventional ballast.Optional:Osram version 100Hz, exhibition goods with paint residues on the housing, but unused,or HF version, operating frequency: 120 Hz (resonance-free and flicker-free).Overtemperature protection.Max. Max. distance between ballast and lamp 2m.Operating voltage: 198 - 264V 50Hz - 60HzCurrent consumption: 0,72 APower factor: 0,95Temperature range: -15° ... +50°CAutomatic switch-off in case of lamp failure.Mount protected from moisture.Dimensions: 175 x 88 x 36mm

€69.02*

* Preise inkl. MwSt. zzgl. Versandkosten

Control Gear MH 150W HQI Box IP40

VG-150K

E.g. for recessed ceiling luminairesOperating voltage 220 - 240V 50HzFor indoor use only, IP40For HIT / CDM lamp 150W.incl. igniter.Dim.: L 250mm x W 70mm x H 75mm

€34.99* €49.98* (29.99% saved)

* Preise inkl. MwSt. zzgl. Versandkosten

Control Gear for HQI 150W or NAV150 lamp IP40

VG-150K-3

Magnetic ballast for e.g. recessed ceiling luminaires.For HQI, HIT, CDM or sodium vapour lamps with 150W rated power.Incl. igniter.Access via 3-core cable with open ends,Lamp outlet via 3 individual cables.Fine-wire fuseTemperature cut-off,Operating voltage 220 - 240V 50HzProtection class: IP40 fully insulated - for indoor use onlyMark of conformity: F, CE, ENECDimensions: 143 x 122 x 62mm

€34.99* €49.98* (29.99% saved)

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast Unit MH 150W 24V

VG-155

Closed aluminium profile housing.For operating metal halide lamps HQI, HID, HCI, CDM, as well as high-pressure sodium lamps 150W.Operating voltage 24V DCOperating current: 6.45AAmbient temperature: -30°C ... +65°CIgnition voltage 4.5 kVLow-flicker light. Energy-saving and negligible reactive current.With overload protection and automatic switch-off in case of lamp failure.Protection class IP54Dimensions: L 203mm, W 102.5mm, H 65mm

€119.24* €198.73* (40% saved)

* Preise inkl. MwSt. zzgl. Versandkosten

VIP90 /3 Varintens Fluorescent Dimmer Ballast

VG-3600-3

The luminaire accessory of the VIP90 family allows fluorescent lamps to be dimmed from 0 to 100% in conjunction with a suitable dimmer. At each period of the AC voltage, the VIP90 generates a strong pulse that safely ignites the fluorescent lamp. The ignition is therefore at 100Hz. A 4-wire cable is required to operate the luminaire. Only Leading-edge dimmers with at least 500W load capacity per channel are suitable.The advantages of VIP90 - Control from 0 to 100% (and vice versa) flicker-free - Always flawless ignition of the tubes, even when dimmed - No special lamps (lower costs) - No special ballasts - No additional ground load required (no energy loss) - Control ratio 1 to 10,000 ( depending on lamp type ).Operating voltage 220 - 230V, 50Hz - 60Hz Ambient temperature max. 60°C Different versions for PLC or LL available. e.g. VIP90 /3 = for fluorescent tubes TC-D 18W, TC-T 18W, PL-C 18W 4P, PL-T 18W 4P. The housing dimensions are constructed to fit into different fixture designs. Models are available for compact fixtures or bar fixtures.VIP90/3, tall shape Dimensions: L 220 mm, w 42 mm, h 28 mm.

€91.04* €121.38* (25% saved)

* Preise inkl. MwSt. zzgl. Versandkosten

Dimmable Electronic Ballast SD254-58 2x 58W

VG-3608-5

There is no further ballast required.For T8 lamps: 58W or T5 54W or TC-L 55W (50W)High frequency control.Constant light flux, even at changing line voltage.No electrode flickering, no stroboscopic effects.Lamp warmstart possible at any dimming value.Automatic detection of the lamp type.Control input 1 ... 10V current sink (0.25 mA)Dimming range 1% ... 100%.If the complete cut-off of the lamp is desired, an additional relay must be installed.Operating voltage 180V ... 264V AC or DCEnergy class A1Power factor 0.97Dimensions: L 360mm, w 30 mm, h 29 mm

€59.50*

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast T8 58W

VG-3610

For T8 / T26 /T38 fluorescent lampsEnergy class: BEnergy savings of up to 25% compared to conventional ballasts.HF operation prolongs lamp life.Operating voltage 220V - 240V 50Hz - 60Hz.Dimensions: L 360mm, W 30 mm, H 29 mm

€22.61*

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast T8 2 x 58W

VG-3611

For T8 / T26 /T38 fluorescent lampsEnergy class A2Energy savings of up to 25% compared to conventional ballasts.HF operation prolongs lamp life.Operating voltage 230V.Dimensions: L 360mm, W 30 mm, H 29 mm

€26.18*

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast T8 /T26 18W

VG-3620

For T5 /T8 / T26 /T38 / TC-L / TC-F fluorescent lamp 36W.Energy class B Energy savings of up to 25% compared to conventional ballasts.HF operation prolongs lamp life.Ambient temperature: -20°C ... +60°C Operating voltage 220V - 240V 50- 60Hz (special version 100 - 280V) Power factor 0.96 c Average life of ECG 50,000 h at max. permissible ambient temperature.Automatic switch-off in case of defective or abnormal lamp according to EN-61347-2-3.Outdoor operation only in moisture-proof luminaires.Approvals: VDE, KEMA, CEDimensions: L 260mm, W 30 mm, H 30 mm

From €21.24*

* Preise inkl. MwSt. zzgl. Versandkosten

Details

Electronic Ballast T8 /T26 2x 36W

VG-3621

For 2x T8 / T26 /T38 fluorescent lamps 36WEnergy class A2Energy savings of up to 25% compared to conventional ballasts.HF operation prolongs the lamp life.Ambient temperature: -20°C ... +60°COperating voltage 220V - 240VPower factor 0.96 cAverage life of ECG 50,000 h at max. permissible ambient temperature.Automatic switch-off in case of defective or abnormal lamp in accordance with EN-61347-2-3.If one lamp fails, the second lamp remains lit.Outdoor operation only in moisture-proof luminaires.Approvals: VDE, KEMA, CEDimensions: L 360mm, W 30 mm, H 30 mm

From €27.37*

* Preise inkl. MwSt. zzgl. Versandkosten

Details

Electronic ballast for HQI 50W

VG-50-E

For operating sodium vapour, HQI or ceramic lamps 50W.Small, potted, waterproof,To reduce the housing temperature, mounting on a heat sink or on a metal housing is required.Operating voltage: 198 - 264V 50Hz - 60HzOperating current: 0.36 AAmbient temperature: -40°C ... +65°C. Ignition voltage: 4.5 kVMetal housing encapsulatedDimensions: L 110mm, W 72mm, H 34mmProtection class IP66

€58.91* €130.90* (55% saved)

* Preise inkl. MwSt. zzgl. Versandkosten

ECG Ballast 70W for HQI / CDM lamp

VG-70E

Metal vapour lamp supply unit for flicker-free light.Energy-saving, as well as negligible reactive current.28% energy saving compared to conventional ballast.Operating voltage 220 - 240V 50Hz - 60Hz / 0.36ATemperature range -15° ... +50°CAutomatic switch-off in case of lamp failure.Max. Max. distance between ballast and lamp 2m.Mount protected from moisture.Dimensions: 173 x 78 x 31mm

From €77.35*

* Preise inkl. MwSt. zzgl. Versandkosten

Details

Ballast for HQI 70W or NAV70 lamp IP20

VG-70K-2

Magnetic ballast for e.g. recessed ceiling luminaires.For HQI, HIT, CDM or sodium vapour lamps with 70W - 75W rated wattage.Incl. igniter.Access via 3-core cable with open ends,Lamp outlet cable with Wieland 3-pole connector.Cable compartment can be opened, underneath are 2 three terminal strips with 2 strain reliefs.Temperature cut-off,Operating voltage 220 - 240V 50HzProtection class: IP20 Fully insulated - For indoor use onlyMark of conformity: F, CEDimensions: L 200 / 224mm x W 85mm x H 74mm

€35.22* €44.03* (20.01% saved)

* Preise inkl. MwSt. zzgl. Versandkosten

Professionelle Lichttechnik