Electronic Ballast 24V Railway T8 18W
Electronic Ballast 24V Railway T8 18W
Product number:
VG-T392
Product information "Electronic Ballast 24V Railway T8 18W"
Energy-saving electronic ballast for operating a fluorescent tube directly on the electrical system.
With soft-start - flicker-free, gentle lamp start within two seconds.
All our inverters are CE marked and
Correspondence electrically and mechanically with the Trenitalia legislation (S.T. 370430) for lighting on rail vehicles.
These ballasts are CE marked and comply with European standards compliance (EN50311 latest revision).
Not suitable for T5 lamps.
Power stabilization - uniform light even with fluctuating battery voltage.
Protected against input reverse polarity
Protection against overvoltages
Electronic fuse with idle or defective lamp.
Operating voltage: 26.5V DC DC voltage (18.5V - 35V).
Operating current 0.77A
Internal working frequency 38 KHz
Ambient temperature -25 ° ... + 50 ° C
Max. Housing temperature Tc 80 ° C
Lifetime:> 100,000 hours / 80 ° C /> 90%
Energy class A3
Housing made of aluminum
Protection class: IP20
Dimensions: L 235mm, W 36mm, H 30mm
Minimum order quantity: 10 pcs.
With soft-start - flicker-free, gentle lamp start within two seconds.
All our inverters are CE marked and
Correspondence electrically and mechanically with the Trenitalia legislation (S.T. 370430) for lighting on rail vehicles.
These ballasts are CE marked and comply with European standards compliance (EN50311 latest revision).
Not suitable for T5 lamps.
Power stabilization - uniform light even with fluctuating battery voltage.
Protected against input reverse polarity
Protection against overvoltages
Electronic fuse with idle or defective lamp.
Operating voltage: 26.5V DC DC voltage (18.5V - 35V).
Operating current 0.77A
Internal working frequency 38 KHz
Ambient temperature -25 ° ... + 50 ° C
Max. Housing temperature Tc 80 ° C
Lifetime:> 100,000 hours / 80 ° C /> 90%
Energy class A3
Housing made of aluminum
Protection class: IP20
Dimensions: L 235mm, W 36mm, H 30mm
Minimum order quantity: 10 pcs.
| Energieklasse: | B |
|---|---|
| Leuchtmittel Typ: | Fluo |
| Systemspannung: | 24V DC |
| Watt Lampe: | 18 |
| Watt Total: | 18 |
Login
Zubehörempfehlung
LED Tube T8, 12V-24V DC 600mm 2 Ft 9W 3000K
From
€21.42*
Z-LED-T8-15
Bright LED lamp as a fluorescent tube replacement with high efficiency.This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.Advantages of the LED tube compared to the old fluorescent tubes are the low power consumption,very long burning time and high light output.LED tubes are also practically maintenance-free, which reduces the amortisation period and maintenance costs.Lifetime 50000 hrs - corresponds to about 20 years, during which you save a lot of electricity and do nothave to change lamps.LED tube 60cm ( 170 SMD LED) replaces TL 18W T8,Luminous flux: 1050 lmLight colour: 4000K white ( from 50 pcs. also available in 3000K or 6000K daylight)Colour rendering: Ra > 80Wide beam angle: 180 degPower consumption: 9 WattOperating voltage: 12V and 24V DC (10V - 28V) - not for mains voltage !The electrical connection is made at one end of the tube. The other end is bridged.Reverse polarity protected: +- can be reversedBase: T8, G13 - like standard fluorescent lampsMaterial: Aluminium and cover milky polycarbonateApprovals: TÜV, CE, EMC and RoHS, CEI EN 62776.Sale to trade or industry only. Installation may only be carried out by a qualified electrician.
* Preise inkl. MwSt. zzgl. Versandkosten