Go to homepage

LED Light Strips & Light Bars – Efficient Lighting Systems for Halls, Warehouses, Workshops & Facades

Filter products

–
LED Light Bar Aluminium 0.5m for Outdoor lighting 5000K
LED Light Bar Aluminium 0.5m for Outdoor lighting 5000K
LA-LD-L106.5
Impact-resistant aluminium strip with a service life of over 12 years.Also suitable for truck loading space illumination, for set-up vehicles and loading bridges, for shop windows.Extremely bright LEDs with 50,000 h service life.Light colour: 4000K bright white (on special order also warm white 3000K, red, yellow, green or blue).Light intensity: 450 lumenOperation via: 230V with transformer or via 12V battery.Connected voltage: 12V DC / 0,36AAt both ends approx. 30cm connection cable with round, splash-proof connectors.The lamp is fixed with stainless steel clips (order separately).Beam angle approx.: 120Power consumption: 4,5 WattSplash-proof: IP65Length 50cm, width 23mm, height 11mm

€39.00*
* Prices excl. VAT plus shipping costs
Facade LED Line Bar 24W white 1m RGB
Facade LED Line Bar 24W white 1m RGB
LA-LD-L111
Bright Superflux LEDs (white or coloured)The LED strips have short connecting leads with plugs on both sides, making it easy to operate them several metres apart.Light distribution approx. 40 degreesWith power supply: 220V-240V ACInternal voltage: 24V DCDimensions (L x W x H): 1000 x 20 x 16 mmOther lengths 0.3m, 0.5m, 0.6m, 1.2m (from 20 pcs.)Housing made of anodised and lacquered aluminiumToughened glass T = 3mm satin finishAluminium bracket rotates 90Protection class: IP67 splash-proofwith waterproof connectors (IP67)For the RGB model, please order a suitable DMX controller separately.

From €251.00*
* Prices excl. VAT plus shipping costs
Details
Linear LED Light Lane 115cm 70W IP43
Linear LED Light Lane 115cm 70W IP43
LI-D140
Bright lighting for ceiling mounting. This surface-mounted luminaire replaces the conventional 150W HID HQI luminaires.Built-in LED driver and stabilisation for uniform brightness even with voltage fluctuations. Low power consumption, no maintenance costs, very long life. Completely ready for operation, incl. LED bulbs. The large number of power LEDs results in better heat distribution in the luminaire and a longer service life. With internal through-connection - The continuous row only needs to be connected electrically at one end. A maximum of 20 luminaires can be connected in a row.Colour rendering index: Ra 80 UGR: 16 Operating voltage 220V - 240V / 50 - 60Hz Light emission: Symmetrical 90° (alternatively 60°)Luminous flux: 11160 lm Power factor: 0.97 Ambient temperature: -35° C ... +45° C during operation Total power consumption: 70W Humidity: 10% - 90% LED lifetime > 70000 hrs. Colour temperature 4000 K (daylight) Very stable aluminium die-cast housing, black anodised (white on request)Protection class: IP43 splash-proof Impact resistance: IK05 Dimensions: L 1150mm, W 50mm, H 65 mm On special order: also dimmable via DALI, wireless or 1-10V, Photosensor for automatic daylight-dependent dimming,Light colour 3000K or 6000KCeiling spacerBall-impact grilleChain suspension 1m or 2m Overvoltage protection 12kV

€168.00*
* Prices excl. VAT plus shipping costs
Lighting strip LED hall lighting Lane 171cm 105W IP43
Lighting strip LED hall lighting Lane 171cm 105W IP43
LI-D141
Bright lighting for ceiling mounting. This surface-mounted luminaire replaces the conventional 250W HID HQI luminaires.Built-in LED driver and stabilisation for uniform brightness even with voltage fluctuations. Low power consumption, no maintenance costs, very long life. Completely ready for operation, incl. LED bulbs. The large number of power LEDs results in better heat distribution in the luminaire and a longer service life. With internal through-connection - The continuous row only needs to be connected electrically at one end. A maximum of 20 luminaires can be connected in a row.Colour rendering index: Ra 80 UGR: 16 Operating voltage 220V - 240V / 50 - 60Hz Light emission: Symmetrical 90° (alternatively 60°)Luminous flux: 16740 lm Power factor 0.97 Ambient temperature: -35° C ... +45° C during operation Total power consumption: 105W Humidity: 10% - 90% LED lifetime > 70000 hrs. Colour temperature 4000 K (daylight) Very stable aluminium die-cast housing, black anodised (white on request)Protection class: IP43 splash-proof Impact resistance: IK05 Dimensions: L 1710mm, W 50mm, H 65 mm On special order: also dimmable via DALI, wireless or 1-10V, Photosensor for automatic daylight-dependent dimming,Light colour 3000K or 6000KCeiling spacerBall-impact grilleChain suspension 1m or 2m Overvoltage protection 12kV

€195.00*
* Prices excl. VAT plus shipping costs
LED Fixture T8 with diffuser 60cm 2x T8
LED Fixture T8 with diffuser 60cm 2x T8
LI-L2033
With prismatic cover - diffuses the light and makes the lamp glare-free.This is especially important at low ceiling heights, such as Counter lighting, kitchen, dressing rooms or dry cellar rooms.The brightness corresponds to about 180W incandescent light.Suitable for office, workplace, corridor, fitness center.(2 matching LED tubes T8 please order separately)Light color: 4000K natural whiteVoltage: 220-240VPower: 8W or 2x 8WHousing: sheet steel whiteCover: PVCProtection class IP40Length 650mm, height 66mm, width 152mm, white

€21.00*
* Prices excl. VAT plus shipping costs
LED Fixture T8 24V with diffuser 120cm 36W
LED Fixture T8 24V with diffuser 120cm 36W
LI-L2045
With prismatic cover - diffuses the light and makes the lamp glare-free.This is especially important at low ceiling heights, such as Counter lighting, kitchen, dressing rooms or dry cellar rooms.The brightness corresponds to about 360W incandescent light.Suitable for bus, train, ship, boat, emergency power systems, battery operation.Incl. 2 LED tubes T8Light color: 4000K natural whiteVoltage: 24V DC (20-29V)Power: 36WCurrent: 1.5 AHousing: sheet steel whiteCover: PVCProtection class IP40Length 1250mm, height 66mm, width 152mm, whiteThe tubes can be changed.

€78.00*
* Prices excl. VAT plus shipping costs
%
Fluorescent Lighting Fixture flat, with diffuser 18W T8 IP40
Fluorescent Lighting Fixture flat, with diffuser 18W T8 IP40
LI-L2070E
Versions for 1 or 2 fluorescent tubes T8 18W.The brightness corresponds to about 90W or 180W incandescent light.With prismatic cover - scatters the light and makes the luminaire glare-free.This is particularly important with low ceiling height, e.g. Counters, kitchen, dressing rooms or dry cellar rooms.Electronic ballast EVG flicker-free and for extended lamp life.(Please order fluorescent tubes T8 separately)Protection class IP40Length 622mm, height 35mm, width 120mm, Casing: Plastic, white

€18.00* €20.00* (10% saved)
* Prices excl. VAT plus shipping costs
Details
%
Fluorescent Fixture T8 with diffuser 2x 36W
Fluorescent Fixture T8 with diffuser 2x 36W
LI-L2075
With prismatic cover - diffuses the light and makes the luminaire more glare-free. This is particularly important for low ceiling heights, such as counter lighting, kitchens, changing rooms or dry basement rooms. The brightness is equivalent to about 360W incandescent light.Sufficient for a small office or workplace. Electronic ballast EVG flicker-free and for extended lamp life.(Please order matching T8 fluorescent tubes separately). Protection class IP40 Length 1256mm, height 68mm, width 165mm

€29.76* €48.00* (38% saved)
* Prices excl. VAT plus shipping costs
%
Fluorescent Fixture T8 with diffuser 2x 58W
Fluorescent Fixture T8 with diffuser 2x 58W
LI-L2076
With prismatic cover - diffuses the light and makes the luminaire more glare-free.This is particularly important for low ceiling heights, such as counter lighting, kitchens, changing rooms or dry basement rooms.The brightness corresponds to about 500W incandescent light.Sufficient for a small office or workplace.Electronic ballast EVG flicker-free and for extended lamp life.(Please order matching T8 fluorescent tubes separately).Protection class IP40Length 1556mm, height 68mm, width 165mm

€38.86* €58.00* (33% saved)
* Prices excl. VAT plus shipping costs
%
Fluorescent Fixture 120cm T5 with diffuser 1x 28W
Fluorescent Fixture 120cm T5 with diffuser 1x 28W
LI-L2083
With prismatic cover.Applications: Areas with higher protection requirements: Hospitals, laboratories, passageways, offices.Available for 1 or 2 fluorescent tubes T5 28W.(Lamps must be ordered extra).With flicker-free electronic ballast for low energy consumption and extended lamp life.Protection class IP40Chassis sheet steel, white.Length 1230mm, height 64mm, width 173mm.Optionally: 12V, 24V supply voltage or with emergency lighting supply.

From €28.70* €41.00* (30% saved)
* Prices excl. VAT plus shipping costs
Details
%
Flat Fluorescent Fixture T5 with diffuser 54W
Flat Fluorescent Fixture T5 with diffuser 54W
LI-L2086
With prismatic cover.Use: places with increased protection: hospitals, laboratories, passages, kitchens, offices.Versions for 1 or 2 fluorescent tubes T5 54W.(Please order lamps separately).With electronic ballast flicker-free and for extended lamp life.Protection class IP44Support plate made of sheet steel, white.Length 1230mm, height 64mm, width 173mm.As accessory: For larger quantities 24V supply or with emergency power supply.

€40.60* €58.00* (30% saved)
* Prices excl. VAT plus shipping costs
Details
Fluorescent Fitting PT T8 36W with Protecting Tube, magnetic
Fluorescent Fitting PT T8 36W with Protecting Tube, magnetic
LI-L4003
Industrial luminaire made of sheet steel, white powder-coatedOptionally with low-loss CCG ballast (CCG) and starteror with ECG flicker-free for lower power consumption and extended lamp life.With shatterproof plastic protective tube.Suitable for fluorescent tube T8 36W. ( Please order separately )Protection class IP40Dimensions: L 1228 mm, W 50 mm, H 88 mm

From €21.00*
* Prices excl. VAT plus shipping costs
Details
%
Fluorescent Trunking Lighting Reflector 1x 58W
Fluorescent Trunking Lighting Reflector 1x 58W
LI-L4024
Bayable continuous row luminaire for suspension. Quick mounting with mechanical connectors. No additional mounting rails are required. Incl. 5-core through-wiring with quick connectors,Load capacity max. 16 A. With flicker-free and long-life electronic ballast for long service life. In reflector housing. Can be fitted with 1 x fluorescent tube T8 58W. Protection class IP20 (optionally IP40 with cover glass). Housing made of white powder-coated sheet steel. Dimensions: L 1530 mm, W 200 mm, H 110 mm. This item can only be shipped as bulky goods -The surcharge is a one-time fee of 29.75 euros or by collection.

€46.90* €67.00* (30% saved)
* Prices excl. VAT plus shipping costs
%
Fluorescent Trunking Light Poker SL 2x 58W ECG
Fluorescent Trunking Light Poker SL 2x 58W ECG
LI-L4028
Lined-row luminaire to hang out.Fast assembly by mechanical connectors.There are no additional mounting rails required.Incl. 5-core through-wiring with quick connectors, loading capacity max. 16 A.With electronic ballast for flicker-free and durable long life.In reflector housing.For 2 x 58W T8 fluorescent tube.Voltage: 220-230V 50Hz (on request other voltages)Protection degree IP20 (optionally IP40 with cover glass)Housing: Sheet steel, white coated.Dimensions: L 1530 mm, W 200 mm H 110 mmAvailable accessories:Mechanical connector straightEnd capCover glass opal or clearsuspension mountingS-hooks for chain connectionchain

€53.90* €77.00* (30% saved)
* Prices excl. VAT plus shipping costs
%
Diffusor Cover for Poker 58W
Diffusor Cover for Poker 58W
LI-L402AB5
Plastic protective screen 150cm for continuous row system.

€13.00* €26.00* (50% saved)
* Prices excl. VAT plus shipping costs
Hang-Up Bracket for Poker Fluro Line
Hang-Up Bracket for Poker Fluro Line
LI-L402AT
2 x pendant fixings are required per continuous row luminaire.

€1.00*
* Prices excl. VAT plus shipping costs
Mechanical Joint For Poker SL Line
Mechanical Joint For Poker SL Line
LI-L402MV
For connecting two Poker SL batten luminaires to form a continuous row.

€6.00*
* Prices excl. VAT plus shipping costs
S-Hook for Poker SL Line
S-Hook for Poker SL Line
LI-L402SV

€1.00*
* Prices excl. VAT plus shipping costs
Masking Cover For Poker SL Line
Masking Cover For Poker SL Line
LI-L402VA
For clean connection of two continuous row luminaires.

€2.00*
* Prices excl. VAT plus shipping costs
Continuous row luminaire Connect light rail T8 150cm
Continuous row luminaire Connect light rail T8 150cm
LI-L4030
Bayable continuous row luminaire for suspension. Quick mounting with mechanical connectors. No additional mounting rails are required.Incl. 5-core through-wiring with connectors,Load capacity max. 16 A. Only the first luminaire, at the beginning of the continuous row, is electrically connected.All other luminaires are simply plugged together. With flicker-free and long-life electronic ballast for reduced power consumption. Can be fitted with 2 x fluorescent tubes T8 58W. Protection class IP20 (optionally IP40 with cover glass). Housing made of white powder-coated sheet steel. With integrated white reflector. Dimensions: L 1540 mm, W 130 mm, H 80 mm Available as accessories:Mechanical connector, straight end cap, suspension attachment, S-hook for chain connection, chain

€67.00*
* Prices excl. VAT plus shipping costs
LED Light Batten T5-Design Slim 60cm
LED Light Batten T5-Design Slim 60cm
LI-L4075
Bathroom and furniture luminaire with IP20 protection. High energy saving and extended lamp life.Connected voltage 230V Power consumption 8W With LEDs Light colour 3000K warm white. (from 8 pcs. also in 4000K)Luminous flux 480 Lm With switch Including 1m plug-in connection cable. Connection sockets on both sides Extendable / expandable by additional connecting cable. Up to 30 strips can be connected by cable or directly to each otherWhite plastic housing Dimensions: L 610 mm, W 22 mm, H 44 mm

€25.00*
* Prices excl. VAT plus shipping costs
%
Light Batten Fluorescent T5 Linear Slim 6W ECG
Light Batten Fluorescent T5 Linear Slim 6W ECG
LI-L4080
Lamp for mirror or furniture lighting.Protection grade IP20With electronic ballast for flicker-free lighting.On-off switchIncluding fluorescent tube T5, length 212mm, Ø 16mm, 6 Watt 4000K.Voltage: 220-230V 50Hz (on request other voltages)Approvals: CE, FWith pluggable connection cable 1,8mWhite plastic housing.Dimensions: l 270 mm, w 22 mm, h 42 mm

€16.80* €24.00* (30% saved)
* Prices excl. VAT plus shipping costs
LED Batten Fitting T8 120cm 1x18W (36W)
LED Batten Fitting T8 120cm 1x18W (36W)
LI-L4125
With LED tube T8 26mm, 120cm.Power: 20WLuminous flux: 1800 LmLight colour: 4000K natural white (from VE=25 pcs. also 3000K or 6000K)Voltage: 220-240VApprovals: CEMade in: EUSheet steel housing, white coatedProtection class: IP 20 - Only suitable for indoor use.Dimensions: L 1235 mm, W 45 mm, H 60 mmThis item can only be shipped as bulky goods -.The surcharge is 17 euros once or by collection.

€24.00*
* Prices excl. VAT plus shipping costs
LED Batten Fitting T8 150cm 23W (58W)
LED Batten Fitting T8 150cm 23W (58W)
LI-L4127
With LED tube T8 26mm, 150cm.Power: 23WLuminous flux: 2200 LmLight colour: 4000K natural white (from VE=25 pcs. also 3000K or 6000K)Voltage: 220-240VApprovals: CEMade in: EUSheet steel housing, white coatedProtection class: IP 20 - Only suitable for indoor use.Dimensions: L 1535 mm, W 45 mm, H 60 mmThis item can only be shipped as bulky goods -.The surcharge is 17 euros once or by collection.

€28.00*
* Prices excl. VAT plus shipping costs

Glare-Free, Flicker-Free Lighting with Continuous LED Technology – Ideal for Industry, Sports Halls and Architecture

Continuous Lighting Technology for High Ceilings

Light strips and light bars provide uniform illumination of large areas, especially in high-ceilinged halls or high-bay warehouses. Their modular design and high efficiency allow for precise adaptation to any room structure. Glare-free, flicker-free lighting ensures optimal visibility, while dimmable versions enable flexible energy control – ideal for sports halls, multipurpose rooms and logistics centers.

Flexible Solutions for Workshops and Retail Areas

In workshops, production environments or retail spaces, LED light bars with clear, bright light distribution are in high demand. The combination of durable LED technology, robust housing and efficient operation makes them an economical choice for continuous use. Versions with electronic ballasts or SMD technology offer reliable performance with minimal maintenance – perfect for demanding work areas.

Architectural Highlights and Outdoor Impact

For signage, building facades or design-focused interiors, LED bars and light strips with RGB color change or neutral white light provide a stylish way to enhance visual appeal. These lighting solutions are suitable for both indoor and outdoor use and can be expanded as needed with simple plug-in systems. As a result, they not only provide functional illumination but also highlight architectural features with flair.

This website uses cookies to ensure the best experience possible. More information...