Voltage: 12V DCPower: 10W / m120 SMD LEDs per mCan be cut with scissors each 6 Leds (45mm)Backside with strong self-adhesive tape to stick on plain and clean surfaces.We cut this strip in full meter lenght to your specification, up to 10 meters.The wires have to be soldered on one end.Only for dry ambient.Length: 1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m or 10mDimensions: width 8mm, thickness 2.5 mm
For decorations and for pulling into tubelight tubes.Connected voltage 24V DC / 9.45 WPowerful SMD LEDs in white, blue, red, yellow or green.Beam angle of the LEDs 110LED spacing 14mmThe strip can be shortened every 70mm.Connection can be made via soldering points, which are applied to the strip at 70mm intervals.Temperature range -30°C ... +65°CWidth 10mm, height 2,6mm.There is a strong self-adhesive tape on the back.The tape is only for dry areas or indoor use.Coloured only available in 5m lengths.
Voltage: 12V DCPower: 5.28W / m33 SMD LEDsCan be cut with scissors each 3 Leds (45mm)Backside with strong self-adhesive tape to stick on plain and clean surfaces.The wires have to be soldered on one end.Only for dry ambient.Length: 500mmDimensions: width 8mm, thickness 2.5 mm
Voltage: 12V DCPower: 5.28W / m60 SMD LEDs per mCan be cut with scissors each 3 Leds (45mm)Backside with strong self-adhesive tape to stick on plain and clean surfaces.We cut this strip in full meter lenght to your specification, up to 10 meters.The wires have to be soldered on one end.Only for dry ambient.Length: 1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m or 10mDimensions: width 8mm, thickness 2.5 mm
For decorations, backlighting, bathrooms, advertising banners and for pulling into aluminium profiles.Connecting voltage 12V DCPower: 7 Watt /mBright SMD 5050 RGB LEDsEach chip contains 3 coloured LEDs to produce pure mixed colours.Radiation angle: 110°.LED spacing 33mm.The ribbon can be cut at 10cm intervals.The connection is made by soldering points.Width 12mm.There is a strong self-adhesive tape on the back.A 12V DC power supply and an RGB control unit are required for operation.Protection class IP65 (splash-proof)
For decorations, backlighting, bathroom, kitchen and for pulling into aluminium profiles.Connected voltage 12V DCPower: 3,6 WattPowerful SMD LEDs with 120° beam angle.Light colour 4500K neutral white (on request also warm white, red, green or blue)LED spacing 20mmThe strip can be cut at 10cm intervals.At the end there are 10cm short connection strands.Width 8,5mm, length 100cmThere is a strong self-adhesive tape on the back.A 12V DC power supply is required for operation.Protection class IP65 (rainproof)
€8.33*
* Preise inkl. MwSt. zzgl. Versandkosten
This website uses cookies to ensure the best experience possible. More information...