LED Tube T8, 600mm 2Ft Professional 8-10W (18W)
LED Tube T8, 600mm 2Ft Professional 8-10W (18W)
Product number:
Z-LED-T8-18
Product information "LED Tube T8, 600mm 2Ft Professional 8-10W (18W)"
Bright LED lamp as a fluorescent tube replacement with high efficiency.
This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.
Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube.
LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.
LED tube 60cm replaces TL 18W T8 740 or 840
Quick replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.
Not suitable for luminaires with ECG or luminaires in tandem circuit !
Installation should only be carried out by a qualified electrician.
Lifetime: 26000 hours - corresponds to about 11 years, during which you save a lot of electricity and do not have to change lamps.
Annual electricity cost saving 52.6 kW at 12 hrs. daily / 0.16 Eur = 8.41 Euro per tube
Luminous flux: 1250 lm
Light colour: 4500K white (on special order from 10 pcs. also 3000K warm white)
Wide beam angle: 180 deg
Operating voltage: 120V - 240V AC
Power consumption: 10 Watt
Base: T8, G13 - like standard fluorescent lamps
Length: 600mm
Material: Frosted glass
Approvals: TÜV, CE, EMC and RoHS, CEI EN 62776
This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.
Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube.
LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.
LED tube 60cm replaces TL 18W T8 740 or 840
Quick replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.
Not suitable for luminaires with ECG or luminaires in tandem circuit !
Installation should only be carried out by a qualified electrician.
Lifetime: 26000 hours - corresponds to about 11 years, during which you save a lot of electricity and do not have to change lamps.
Annual electricity cost saving 52.6 kW at 12 hrs. daily / 0.16 Eur = 8.41 Euro per tube
Luminous flux: 1250 lm
Light colour: 4500K white (on special order from 10 pcs. also 3000K warm white)
Wide beam angle: 180 deg
Operating voltage: 120V - 240V AC
Power consumption: 10 Watt
Base: T8, G13 - like standard fluorescent lamps
Length: 600mm
Material: Frosted glass
Approvals: TÜV, CE, EMC and RoHS, CEI EN 62776
| Energieklasse: | D |
|---|---|
| Leuchtmittel Typ: | LED |
| Systemspannung: | 230V |
| Watt Lampe: | 9 |
Login
Zubehörempfehlung
Waterproof Fluorescent Light Fixture Single 18W IP65
From
€21.42*
LI-L5011-1
Housing and cover made of impact-resistant polycarbonate for wall or ceilingwall or ceiling surface mounting or for pendant mounting.Impact-resistant, vandal-proof, resistant to dilute acids, many oils and greases, as well as ethanol, butto ethanol, but not resistant to bases, aromatic and halogenated hydrocarbons,as well as ketones and esters.Suitable for underground car parks, kitchens, bakeries, indoor areas.Temperature range: -20°C to + 50C°.Lamp dust-tight and jet-proof to IP65.Quick-release clips for easy lamp replacement.Suitable for through-wiringSuitable for 1x tube T8 18W 60cm length.Please order the fluorescent tube separately.Built-in, low-loss ballast with reactive current compensation + starterOr energy-saving electronic ballast for longer lamp life.Dimensions: L 660 mm, W 100 mm, H 106 mm
* Preise inkl. MwSt. zzgl. Versandkosten
Dummy Starter Bridge for LED Tube
€1.19*
VG-STA80
Material: Flame retardant polycarbonate Insulation resistance: > 3 MOhm With fuse: 1A This starter bridge is suitable for use with the LED tubes we sell. Only luminaires with CCG or CCG may be used, ECG luminaires are not suitable. Instructions: Switch off the power supply to the luminaire, remove old tube and old starter, Insert starter bridge and new LED tube and turn until it clicks into place. Switch on the luminaire again.Delivery only in packaging of 25 pieces. The bridges are included free of charge with the purchase of our LED tubes.
* Preise inkl. MwSt. zzgl. Versandkosten