Professionelle Lichttechnik

With highly efficient SMD LEDs. Replaces a fluorescent tube 36W T8 and is much brighter. Housing and cover made of impact-resistant polycarbonate. For wall or ceiling surface mounting. Flicker-free, bright light with low energy consumption - only approx. 50% compared to T8 fluorescent tubes. With 3 meters long cable. Light colour: 4000K natural white Light distribution 120° wide Luminous flux: 2160 Lm CRI: 80 - 89 Operating voltage: 12 - 24V DC Power consumption: 20W Harmonic distortion THD < 3% Temperature range: -20°C to + 50°C Average life: 50000 h Material: High quality PC UV stabilised Protection class: IP65 Dimensions: L 1200 mm Diameter: 28 mm

Bright LED lamp as a fluorescent tube replacement with high efficiency.This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube. LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.LED tube 60cm replaces TL 18W T8 740 or 840Quick replacement for luminaires with magnetic ballast (CCG or CCG).Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Not suitable for luminaires with ECG or luminaires in tandem circuit !Installation should only be carried out by a qualified electrician.Lifetime: 26000 hours - corresponds to about 11 years, during which you save a lot of electricity and do not have to change lamps.Annual electricity cost saving 52.6 kW at 12 hrs. daily / 0.16 Eur = 8.41 Euro per tubeLuminous flux: 1000 lmLight colour: 4500K white (on special order from 10 pcs. also 3000K warm white or 6000K daylight)Wide beam angle: 180 degOperating voltage: 185V - 240V ACPower consumption: 9 WattBase: T8, G13 - like standard fluorescent lampsLength: 600mm Material: Matt aluminium and polycarbonateApprovals: TÜV, CE, EMC and RoHS, CEI EN 62776

Bright LED lamp as a fluorescent tube replacement with high efficiency. This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube.LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.LED tube 60cm replaces TL 18W T8 740 or 840Quick replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Not suitable for luminaires with ECG or luminaires in tandem circuit ! Installation should only be carried out by a qualified electrician. Lifetime: 26000 hours - corresponds to about 11 years, during which you save a lot of electricity and do not have to change lamps. Annual electricity cost saving 52.6 kW at 12 hrs. daily / 0.16 Eur = 8.41 Euro per tubeLuminous flux: 1250 lmLight colour: 4500K white (on special order from 10 pcs. also 3000K warm white)Wide beam angle: 180 degOperating voltage: 120V - 240V ACPower consumption: 10 WattBase: T8, G13 - like standard fluorescent lampsLength: 600mm Material: Frosted glassApprovals: TÜV, CE, EMC and RoHS, CEI EN 62776

Powerful LED lamp as replacement against fluorescent tubes - bright LED tube.Very bright by high flux SMD LED.Advantages of LED tube lamps against the old fluorescent tubes: Low power consumption, very long life time, high brightness, contains no toxic elements.LED tubes are maintenance free, wich results in a fast amortisation.This tube replaces a fluorescent tube TL 36W T8Rated life: 25000 h - more than 20 years.Luminous flux: 2160 lmLight colour: 4500K pure white ( at 50 pcs. on request with 3000K warm white or 6500K daylight)Wide beam spread: 180°Matted diffusor (on request in clear available)Operating voltage: 12V and 24V DC (10V - 28V) - not for mains voltage !The electrical connection is made at one end of the tube. The other end is bridged.Reverse polarity protected: +- can be reversedPower: 18 wattEasy exchange at lighting fixtures with magnetic ballast.Only the ignitor has to be removed. Than the old tube has to be taken out and replaced by the new LED tube.Not suitable for fixtures with electronic ballast !Socket: T8, G13 - like standard fluorescent tubes.Material: Glass / aluminiumLength: 1200 mmDiameter: 28 mmStandards: TÜV, CE, EMC, ETL, SAA, GS, FCC und RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015Sale to trade or industry only. Installation may only be carried out by a qualified electrician.

Light-intensive LED lamp as a fluorescent tube replacement with high efficiency.This super-bright LED tube achieves a greater brightness than the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful substances, such as mercury, are needed in the production of the LED fluorescent tube. LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.LED tube 1500mm replaces TL 58W T8,Easy replacement of luminaires with magnetic ballast ( VVG or KVG ).With the old luminaire, only the starter has to be replaced by the starter bridge supplied !With integrated IR sensor, range 5-8 metres. Illumination only when a person is present, for approx. 1 minute.Lifetime: 50000 hrs. - corresponds to about 20 years, during which you save a lot of electricity and do not have to change lamps.Annual electricity cost savings approx. 90%.Luminous flux: 2800 lmLight colour: 4000K white (on special order also 6000K daylight or 3000K warm tone)Colour rendering index Ra: > 85Wide beam angle: 180 degTube surface milkyOperating voltage: 85V - 260V ACPower consumption: 24WAmbient temperature: -25°C to 50°CBase: T8, G13 - like standard fluorescent lampsMaterial: Aluminium and polycarbonateApprovals: TÜV, CE and RoHSMinimum order quantity: 25 pcs.LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 29,75 Euro or by collection.

Light-intensive LED lamp as a fluorescent tube replacement with high efficiency.This super-bright LED tube achieves a greater brightness than the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful substances, such as mercury, are needed in the production of the LED fluorescent tube. LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.Easy replacement of luminaires with electronic ballasts (EBs, EBs or CCGs).Nothing has to be changed on the luminaire or the electronic ballast.For old luminaires with magnetic ballast, the starter must be replaced by the supplied starter bridge !LED tube 1500mm (432 LED) replaces TL 58W T8,Lifetime: 50000 hrs - corresponds to about 20 years in which you save a lot of electricity and do not have to change lamps.Annual electricity cost saving 178,7kW at 12 hrs. daily / 0,16 Eur = 28,59 Euro per tubeLuminous flux: 3000 lmLight colour: 4500K white (on special order also 6000K daylight or 3000K warm tone)Colour rendering index Ra: > 85Wide beam angle: 180 degStandard version frostedOperating voltage: 85V - 260V ACPower consumption: 23WAmbient temperature: -25°C to 55°CBase: T8, G13 - like standard fluorescent lampsMaterial: aluminium and polycarbonateApprovals: TÜV, CE and RoHSMinimum order quantity: 25 pcs.LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 29,75 Euro or by collection.

Bright LED lamp as a fluorescent tube replacement with high efficiency.This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.High luminous intensity due to wide-beam Power LED.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption,very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases,such as mercury vapour, are needed in the production of the LED fluorescent tube. LED tubes are also virtually maintenance-free, which reduces amortisation costs and maintenance costs.Annual electricity cost savings 52.6 kW at 12 hrs. daily / 0.16 Eur = 8.41 Euro per tube.LED tube 60cm (10W) replaces TL 18W T8Lifetime: 25000 hrs. - corresponds to about 8.5 years in which you save a lot of electricity and do not have to change the lamp.Luminous flux: 970 lmLight colour: 4500K white (on special order from 5 pcs. also 6000K daylight)Wide beam angle: 120Standard version frosted (on special request also available clear)Operating voltage: 85V - 230V ACPower consumption: 10 WattTemperature range: -25°C to + 35°CQuick replacement for luminaires with magnetic ballast (KVG or VVG).Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Not suitable for luminaires with ECG or luminaires in tandem circuit !Installation should only be carried out by a qualified electrician.Base: T8, G13 - like standard fluorescent lampsLength: 600mmMaterial: Aluminium and polycarbonate.The tube has TÜV, CE, EMC and RoHS certificates.

Bright LED lamp as a fluorescent tube replacement with high efficiency.This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.High luminous intensity due to wide-beam Power LED.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption,very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases,such as mercury vapour, are needed in the production of the LED fluorescent tube. LED tubes are alsopractically maintenance-free, which reduces amortisation costs and maintenance costs.Annual electricity cost saving 96kW at 12 hrs. daily / 0,16 Eur = 15,42 Euro per tube.LED tube 120cm (342 LED) replaces TL 36W T8,Lifetime: 25000 hrs. - corresponds to about 8.5 years in which you save a lot of electricity and do not have to change lamps.Luminous flux: 1900 lmLight colour: 4500K white (on special order from 5 pcs. also 6000K daylight)Wide beam angle: 120Standard version frosted (on special request also available clear)Operating voltage: 85V - 230V ACPower consumption: 18 WattTemperature range: -25°C to + 35°CQuick replacement for luminaires with magnetic ballast (KVG or VVG).Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Installation should only be carried out by a qualified electrician.Not suitable for luminaires with electronic ballast !Base: T8, G13 - like standard fluorescent lamps.Material: aluminium and glass.The tube has TÜV, CE, EMC and RoHS certificates.

Light-intensive LED lamp as a fluorescent tube replacement with high efficiency.This super-bright LED tube achieves a greater brightness than the previous T8 fluorescent tubes.Particularly bright and wide, even light distribution due to high-quality SMD LED chips.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption,very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful substances,such as mercury, are needed in the production of LED fluorescent tubes. LED tubes are also practicallymaintenance-free, which reduces amortisation costs and maintenance costs.Annual electricity cost saving 178,7kW at 12 hrs. daily / 0,16 Eur = 28,59 Euro per tubeLED tube 1500mm (432 LED) replaces TL 58W T8,Lifetime: 25000 hrs. - corresponds to about 8.5 years in which you save a lot of electricity and do not have to change lamps.Luminous flux: 2200 lmLight colour: 4500K white (on special order from 5 pcs. also 6000K daylight)Wide beam angle: 125Standard version frostedOperating voltage: 85V - 230V ACPower consumption: 22 WattTemperature range: -25°C to + 35°CProblem-free replacement for luminaires with magnetic ballast (KVG or VVG).Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Installation should only be carried out by a qualified electrician.Not suitable for luminaires with electronic ballast !Base: T8, G13 - like standard fluorescent lamps.Material: aluminium and glass.The tube has TÜV, CE, EMC and RoHS certificates.Minimum order quantity 4 pcs.LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 Euro or by collection.

Bright LED lamp as a fluorescent tube replacement with high efficiency.This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube. LED tubes are also virtually maintenance-free, which reduces amortisation costs and maintenance costs.About 8.5 years, during which you save a lot of electricity and do not need to change lamps.Annual electricity cost saving 96kW at 12 hrs. daily / 0,16 Eur = 15,42 Euro per tube.LED tube 120cm ( 342 LED) replaces TL 36W T8,Luminous flux: 1900 lmLight colour: 4500K white (on special order from 5 pcs. also 6000K daylight)Wide beam angle: 180 degLifetime: 25000 hoursTube: frosted (on special request also available clear)Operating voltage: 85V - 230V ACPower consumption: 18 WattNot suitable for luminaires with electronic ballast !Base: T8, G13 - like standard fluorescent lampsMaterial: aluminium and glassApprovals: TÜV, CE, EMC and RoHS, CEI EN 62776Quick replacement for luminaires with magnetic ballast (CCG or CCG).Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Installation should only be carried out by a qualified electrician.LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 euros once or by collection.

Bright LED lamp as a fluorescent tube replacement with high efficiency.This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube. LED tubes are also virtually maintenance-free, which reduces amortisation costs and maintenance costs.About 8.5 years, during which you save a lot of electricity and do not need to change lamps.Annual electricity cost saving 96kW at 12 hrs. daily / 0,16 Eur = 15,42 Euro per tube.LED tube 120cm ( 342 LED) replaces TL 36W T8,Luminous flux: 2300 lmLight colour: 4500K white (on special order from 5 pcs. also 6000K daylight)Wide beam angle: 180 degLifetime 25000 hrsTube: Frosted (on special request also available clear)Operating voltage: 85V - 230V ACPower consumption: 18 WattNot suitable for luminaires with electronic ballast !Base: T8, G13 - like standard fluorescent lampsMaterial: aluminium and glassApprovals: TÜV, CE, EMC and RoHS, CEI EN 62776Quick replacement for luminaires with magnetic ballast (CCG or CCG).Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Installation should only be carried out by a qualified electrician.LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 euros once or by collection.

Powerful LED lamp as energy economizing replacement against fluorescent tubes.Very bright by high flux SMD LED.LED tubes are maintenance free, wich results in a fast amortisation. Vibration proof, fire proof. This tube replaces a fluorescent tube TL 18W T8 Luminous flux:            1050 lm Light colour:                 4000K white 840 ( from 50 pcs. also available in 3000K or 6000K daylight) Colour rendering:            Ra > 80 Rated life:                        26000 h - more than 11 years. Wide beam angle:           180 deg Power consumption:       9 Watt Operating voltage:           12V and 24V DC (10V - 28V) - not for mains voltage ! The electrical connection is made at one end of the tube. The other end is bridged. Reverse polarity protected: +- can be reversed Base:                               T8, G13 - like standard fluorescent lamps Material:                          Aluminium and cover milky polycarbonate Approvals:                     TÜV, CE, EMC and RoHS, CEI EN 62776. Length:                            600 mm Diameter:                         28 mm Standards:                       TÜV, CE, EMC, ETL, SAA, GS, FCC und RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014,                                          EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015, EN 45545 ( R24) fire protection Sale to trade or industry only. Installation may only be carried out by a qualified electrician.

Powerful LED lamp as replacement against fluorescent tubes - bright LED tube.Very bright by high flux SMD LED.Advantages of LED tube lamps against the old fluorescent tubes: Low power consumption, very long life time, high brightness, contains no toxic elements. LED tubes are maintenance free, wich results in a fast amortisation. This tube replaces a fluorescent tube TL 36W T8 Easy exchange at lighting fixtures. All kind of ballast or ignitors have to be removed from the lighting fixture. The direct operation on 12V or 24V dc voltage is required. Rated life:                 35000 h - more than 20 years. Luminous flux:          2160 lm Light colour:             4000K pure white 840 ( at 50 pcs. on request with 3000K warm white or 6500K daylight) Wide beam spread: 180° Matted diffusor (on request in clear available) Operating voltage:   12V and 24V DC (10V - 28V) - not for mains voltage ! The electrical connection is made at one end of the tube. The other end is bridged. Reverse polarity protected: +- can be reversed Power:                     18 watt Socket:                    T8, G13 - like standard fluorescent tubes. Material:                   aluminium / polycarbonate Length:                    1200 mm Diameter:                 28 mm Standards:               TÜV, CE, EMC, ETL, SAA, GS, FCC und RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014,                                  EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015,                                  EN 45545 ( R24) fire protection  Sale to trade or industry only. Installation may only be carried out by a qualified electrician.

Bright LED lamp as a fluorescent tube replacement with high efficiency. This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes. Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube. LED tubes are also virtually maintenance-free, which reduces amortisation costs and maintenance costs.About 8.5 years, during which you save a lot of electricity and do not need to change lamps. Annual electricity cost saving 96kW at 12 hrs. daily / 0,16 Eur = 15,42 Euro per tube. LED tube 120cm ( 342 LED) replaces TL 36W T8, Luminous flux:         2160 lm Light colour:             4000K white 840 (on special order from 5 pcs. also 6000K daylight) Wide beam angle:    180 deg Lifetime                    35000 hrs Tube:                        Frosted (on special request also available clear) Operating voltage:    85V - 265V AC Frequenz:                  50Hz ... 100Hz Power consumption: 18 Watt Base:                        T8, G13 - like standard fluorescent lamps Material:                     aluminium / polycarbonate Diameter:                   28 mm Approvals:                TÜV, CE, EMC and RoHS, CEI EN 62776, EN 45545 ( R24) fire protection Quick replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.If there is an ECG in the luminaire, it must be disconnected. Installation should only be carried out by a qualified electrician. LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 euros once or by collection.

Light-intensive LED lamp as a fluorescent tube replacement with high efficiency. This super-bright LED tube achieves a greater brightness than the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful substances, such as mercury, are needed in the production of the LED fluorescent tube. LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.Approximately 8.5 years, during which you save a lot of electricity and do not need to change lamps. Annual electricity cost saving 178.7kW at 12 hrs. daily / 0.16 Eur = 28.59 Euro per tube.LED tube 1500mm (432 LED) replaces TL 58W T8, Luminous flux:      2200 lm Light colour:          4500K white (on special order from 5 pcs. also 6000K daylight) Wide beam angle: 180 deg Lifetime                 26000 hrs Tube:                    frostedOperating voltage: 85V - 230V AC Power consumption: 18,3 Watt Base:                    T8, G13 - like standard fluorescent lamps Material: aluminium and glass Approvals:                TÜV, CE, EMC and RoHS, CEI EN 62776 Problem-free replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Installation should only be carried out by a qualified electrician. Not suitable for luminaires with electronic ballast !LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 euros once or by collection.

Light-intensive LED lamp as a fluorescent tube replacement with high efficiency. This super-bright LED tube achieves a greater brightness than the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful substances, such as mercury, are needed in the production of the LED fluorescent tube. LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.Approximately 8.5 years, during which you save a lot of electricity and do not need to change lamps. Annual electricity cost saving 178.7kW at 12 hrs. daily / 0.16 Eur = 28.59 Euro per tube.LED tube 1500mm (432 LED) replaces TL 58W T8, Luminous flux:      2400 lm Light colour:          4500K white (on special order from 5 pcs. also 6000K daylight) Wide beam angle: 180 deg Lifetime                 50000 hrs Tube:                    frostedOperating voltage: 85V - 230V AC Power consumption: 22 Watt Base:                    T8, G13 - like standard fluorescent lamps Material:                    Aluminium and polycarbonate Approvals:                 TÜV, CE, EMC, ETL, SAA, GS, FCC und RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015Problem-free replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Installation should only be carried out by a qualified electrician. Not suitable for luminaires with electronic ballast !LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 euros once or by collection.

Bright LED lamp as a fluorescent tube replacement with high efficiency.This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.The advantages of the LED tube over the old fluorescent tubes are the low power consumption,very long burning time and high luminous efficacy.This LED fluorescent tube can be operated directly on a 12V battery without a ballast.LED tubes are also practically maintenance-free, which reduces amortisation time and maintenance costs.LED tube 90cm ( SMD LED) replaces TL 30W T8,service life:       25000 hours - equivalent to around 20 years, during which you save a lot of electricity and do notand do not have to change lamps.Luminous flux: 1560 lmLight colour:     4000K white (3000K or 6000K daylight also available on special order from 50 units)Colour rendering: Ra > 80Wide beam angle: 180°Power consumption: 14 wattsOperating voltage: 12V and 24V DC (10V - 28V) - not for mains voltage!Current consumption: Approx. 633 mA @ 24VThe electrical connection is made at one end of the tube. The other end is bridged.Reverse polarity protected: +- can be reversedBase:                   T8, G13 - like standard fluorescent lampsMaterial: Aluminium and cover made of milky polycarbonate.Approvals:          TÜV, CE, EMC, ETL, SAA, GS, FCC and RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015Sale to trade or industry only. Installation may only be carried out by a qualified electrician.

Light-intensive LED lamp as a fluorescent tube replacement with high efficiency. This super-bright LED tube achieves a greater brightness than the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful substances, such as mercury, are needed in the production of the LED fluorescent tube. LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.Approximately 8.5 years, during which you save a lot of electricity and do not need to change lamps. Annual electricity cost saving 178.7kW at 12 hrs. daily / 0.16 Eur = 28.59 Euro per tube.LED tube 1500mm (432 LED) replaces TL 58W T8, Luminous flux:      2400 lm Light colour:          4500K white (on special order from 5 pcs. also 6000K daylight) Wide beam angle: 180 deg Lifetime                 50000 hrs Tube:                    frostedOperating voltage: 85V - 230V AC Power consumption: 22 Watt Base:                    T8, G13 - like standard fluorescent lamps Material:                    Aluminium and polycarbonate Approvals:                 TÜV, CE, EMC, ETL, SAA, GS, FCC und RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015Problem-free replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Installation should only be carried out by a qualified electrician. Not suitable for luminaires with electronic ballast !LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 euros once or by collection.

Powerful LED lamp as replacement against fluorescent tubes - bright LED tube.Very bright by high flux SMD LED.Advantages of LED tube lamps against the old fluorescent tubes: Low power consumption, very long life time, high brightness, contains no toxic elements. LED tubes are maintenance free, wich results in a fast amortisation. This tube replaces a fluorescent tube TL 36W T8 Easy exchange at lighting fixtures. All kind of ballast or ignitors have to be removed from the lighting fixture. The direct operation on 12V or 24V dc voltage is required. Rated life:                 35000 h - more than 20 years. Luminous flux:          2160 lm Light colour:             4000K pure white 840 ( at 50 pcs. on request with 3000K warm white or 6500K daylight) Wide beam spread: 180° Matted diffusor (on request in clear available) Operating voltage:   12V and 24V DC (10V - 28V) - not for mains voltage ! The electrical connection is made at one end of the tube. The other end is bridged. Reverse polarity protected: +- can be reversed Power:                     18 watt Socket:                    T8, G13 - like standard fluorescent tubes. Material:                   aluminium / polycarbonate Length:                    1200 mm Diameter:                 28 mm Standards:               TÜV, CE, EMC, ETL, SAA, GS, FCC und RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014,                                  EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015,                                  EN 45545 ( R24) fire protection  Sale to trade or industry only. Installation may only be carried out by a qualified electrician.

Bright LED lamp as a fluorescent tube replacement with high efficiency. This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes. Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube. LED tubes are also virtually maintenance-free, which reduces amortisation costs and maintenance costs.About 8.5 years, during which you save a lot of electricity and do not need to change lamps. Annual electricity cost saving 96kW at 12 hrs. daily / 0,16 Eur = 15,42 Euro per tube. LED tube 120cm ( 342 LED) replaces TL 36W T8, Luminous flux:        2100 lm Light colour:            4000K white (on special order from 10 pcs. also 6000K daylight) Wide beam angle:    180 deg Lifetime                    50000 hrs Tube: frosted (on special request also available clear) Operating voltage:     220V - 240V AC Power consumption: 14 Watt Not suitable for luminaires with electronic ballast !Base:                        T8, G13 - like standard fluorescent lamps Material: aluminium and glass Approvals:                TÜV, CE, EMC and RoHS, CEI EN 62776Quick replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Installation should only be carried out by a qualified electrician. LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 euros once or by collection.

Bright LED lamp as a fluorescent tube replacement with high efficiency.This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.Advantages of the LED tube compared to the old fluorescent tubes are the low power consumption,very long burning time and high light output.LED tubes are also practically maintenance-free, which reduces the amortisation period and maintenance costs.Lifetime 50000 hrs - corresponds to about 20 years, during which you save a lot of electricity and do nothave to change lamps.LED tube 60cm ( 170 SMD LED) replaces TL 18W T8,Luminous flux: 1050 lmLight colour: 4000K white ( from 50 pcs. also available in 3000K or 6000K daylight)Colour rendering: Ra > 80Wide beam angle: 180 degPower consumption: 9 WattOperating voltage: 12V and 24V DC (10V - 28V) - not for mains voltage !The electrical connection is made at one end of the tube. The other end is bridged.Reverse polarity protected: +- can be reversedBase: T8, G13 - like standard fluorescent lampsMaterial: Aluminium and cover milky polycarbonateApprovals: TÜV, CE, EMC and RoHS, CEI EN 62776.Sale to trade or industry only. Installation may only be carried out by a qualified electrician.

Light-intensive LED lamp as a fluorescent tube replacement with high efficiency.This super-bright LED tube achieves a greater brightness than the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful substances, such as mercury, are needed in the production of the LED fluorescent tube. LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.Approximately 8.5 years, during which you save a lot of electricity and do not need to change lamps.Annual electricity cost saving 178.7kW at 12 hrs. daily / 0.16 Eur = 28.59 Euro per tube.LED tube 1500mm (432 LED) replaces TL 58W T8,Luminous flux: 2200 lmLight colour: 4500K white (on special order from 5 pcs. also 6000K daylight)Wide beam angle: 180 degLifetime 26000 hrsTube: frostedOperating voltage: 85V - 230V ACPower consumption: 24 WattBase: T8, G13 - like standard fluorescent lampsMaterial: aluminium and glassApprovals: TÜV, CE, EMC and RoHS, CEI EN 62776Problem-free replacement for luminaires with magnetic ballast (CCG or CCG).Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Installation should only be carried out by a qualified electrician.Not suitable for luminaires with electronic ballast !LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 euros once or by collection.

With highly efficient SMD LEDs. Replaces a fluorescent tube 18W T8 and is much brighter. Housing and cover made of impact-resistant polycarbonate. For wall or ceiling surface mounting. Flicker-free, bright light with low energy consumption - only approx. 50% compared to T8 fluorescent tubes. With 3 meters long cable. Light colour: 4000K natural white Light distribution 120° wide Luminous flux: 1080 Lm CRI: 80 - 89 Operating voltage: 12 - 24V DC Power consumption: 10W Harmonic distortion THD < 3% Temperature range: -20°C to + 50°C Average life: 50000 h Material: High quality PC UV stabilised Protection class: IP65 Dimensions: L 600 mm Diameter: 28 mm

Powerful LED lamp as replacement against fluorescent tubes - bright LED tube.Very bright by high flux SMD LED.Advantages of LED tube lamps against the old fluorescent tubes: Low power consumption, very long life time, high brightness, contains no toxic elements. LED tubes are maintenance free, wich results in a fast amortisation. This tube replaces a fluorescent tube TL 10W T5 Rated life:                 25000 h - more than 11 years. Luminous flux:          600 lm Light colour:             4000K pure white 840 ( at 50 pcs. on request with 3000K warm white or 6500K daylight) Wide beam spread: 120° Matted diffusor (on request in clear available) Operating voltage:   12V and 24V DC (10V - 28V) - not for mains voltage ! The electrical connection is made at one end of the tube. The other end is bridged. Reverse polarity protected: +- can be reversed Power:                     5 watt Easy exchange at lighting fixtures with magnetic ballast. Only the ignitor has to be removed. Than the old tube has to be taken out and replaced by the new LED tube.Not suitable for fixtures with electronic ballast !Socket:                    T8, G13 - like standard fluorescent tubes. Material:                   aluminium / polycarbonate Diameter:                 22 mm Standards:               TÜV, CE, EMC, ETL, SAA, GS, FCC und RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014, EN 61000-3-3:2013,                                  EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015, EN 45545 ( R24) fire protection  Sale to trade or industry only. Installation may only be carried out by a qualified electrician.