Zubehör

Control PCB for GeoDim Wall 12

PCBGD12KLM

Nur geeignet als Ersatzteil für den GEODIM Wall 12 Wanddimmer.

€386.75*

* Preise inkl. MwSt. zzgl. Versandkosten

Overvoltage protection Device protection adapter

TA-3117

Protects computers, electronics and other sensitive electronic equipment.To protect against high voltages and distant lightnings.230V AC, 50Hz, max. 16ANominal discharge current 6.5 kA per discharge path (8 / 20µs).Response time <25ns

€16.66*

* Preise inkl. MwSt. zzgl. Versandkosten

VIP90 /3 Varintens Fluorescent Dimmer Ballast

VG-3600-3

The luminaire accessory of the VIP90 family allows fluorescent lamps to be dimmed from 0 to 100% in conjunction with a suitable dimmer. At each period of the AC voltage, the VIP90 generates a strong pulse that safely ignites the fluorescent lamp. The ignition is therefore at 100Hz. A 4-wire cable is required to operate the luminaire. Only Leading-edge dimmers with at least 500W load capacity per channel are suitable.The advantages of VIP90 - Control from 0 to 100% (and vice versa) flicker-free - Always flawless ignition of the tubes, even when dimmed - No special lamps (lower costs) - No special ballasts - No additional ground load required (no energy loss) - Control ratio 1 to 10,000 ( depending on lamp type ).Operating voltage 220 - 230V, 50Hz - 60Hz Ambient temperature max. 60°C Different versions for PLC or LL available. e.g. VIP90 /3 = for fluorescent tubes TC-D 18W, TC-T 18W, PL-C 18W 4P, PL-T 18W 4P. The housing dimensions are constructed to fit into different fixture designs. Models are available for compact fixtures or bar fixtures.VIP90/3, tall shape Dimensions: L 220 mm, w 42 mm, h 28 mm.

€91.04* €121.38* (25% saved)

* Preise inkl. MwSt. zzgl. Versandkosten

Dimmable Electronic Ballast SD254-58 2x 58W

VG-3608-5

There is no further ballast required.For T8 lamps: 58W or T5 54W or TC-L 55W (50W)High frequency control.Constant light flux, even at changing line voltage.No electrode flickering, no stroboscopic effects.Lamp warmstart possible at any dimming value.Automatic detection of the lamp type.Control input 1 ... 10V current sink (0.25 mA)Dimming range 1% ... 100%.If the complete cut-off of the lamp is desired, an additional relay must be installed.Operating voltage 180V ... 264V AC or DCEnergy class A1Power factor 0.97Dimensions: L 360mm, w 30 mm, h 29 mm

€59.50*

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast T8 58W

VG-3610

For T8 / T26 /T38 fluorescent lampsEnergy class: BEnergy savings of up to 25% compared to conventional ballasts.HF operation prolongs lamp life.Operating voltage 220V - 240V 50Hz - 60Hz.Dimensions: L 360mm, W 30 mm, H 29 mm

€22.61*

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast T8 2 x 58W

VG-3611

For T8 / T26 /T38 fluorescent lampsEnergy class A2Energy savings of up to 25% compared to conventional ballasts.HF operation prolongs lamp life.Operating voltage 230V.Dimensions: L 360mm, W 30 mm, H 29 mm

€26.18*

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast T8 /T26 18W

VG-3620

For T5 /T8 / T26 /T38 / TC-L / TC-F fluorescent lamp 36W.Energy class B Energy savings of up to 25% compared to conventional ballasts.HF operation prolongs lamp life.Ambient temperature: -20°C ... +60°C Operating voltage 220V - 240V 50- 60Hz (special version 100 - 280V) Power factor 0.96 c Average life of ECG 50,000 h at max. permissible ambient temperature.Automatic switch-off in case of defective or abnormal lamp according to EN-61347-2-3.Outdoor operation only in moisture-proof luminaires.Approvals: VDE, KEMA, CEDimensions: L 260mm, W 30 mm, H 30 mm

From €21.24*

* Preise inkl. MwSt. zzgl. Versandkosten

Details

Electronic Ballast T8 /T26 2x 36W

VG-3621

For 2x T8 / T26 /T38 fluorescent lamps 36WEnergy class A2Energy savings of up to 25% compared to conventional ballasts.HF operation prolongs the lamp life.Ambient temperature: -20°C ... +60°COperating voltage 220V - 240VPower factor 0.96 cAverage life of ECG 50,000 h at max. permissible ambient temperature.Automatic switch-off in case of defective or abnormal lamp in accordance with EN-61347-2-3.If one lamp fails, the second lamp remains lit.Outdoor operation only in moisture-proof luminaires.Approvals: VDE, KEMA, CEDimensions: L 360mm, W 30 mm, H 30 mm

From €27.37*

* Preise inkl. MwSt. zzgl. Versandkosten

Details

Lamp Capacitor 10µF for 70W MH

VG-CL010

With connecting wiresDimensions: Ø 35mmLength 69,5mm

€5.95*

* Preise inkl. MwSt. zzgl. Versandkosten

Lamp Capacitor 18µF 250V

VG-CL018

With connecting wiresDimensions: Ø 35mmLength 69,5mm

€7.74*

* Preise inkl. MwSt. zzgl. Versandkosten

Lamp Capacitor 12µF for 70W MH

VG-CL070

With connecting wiresDimensions: Ø 35mmLength 69,5mm

€5.95*

* Preise inkl. MwSt. zzgl. Versandkosten

Lamp Capacitor 16µF 250V

VG-CL100

With connecting wiresDimensions: Ø 35mmLength 69,5mm

€7.14*

* Preise inkl. MwSt. zzgl. Versandkosten

Lamp Capacitor 30µF for 250W MH

VG-CL250M

Suitable for 250w or 400W lamps with a lamp current of 3.0 to 3.25AWith connecting wiresDimensions: Length 90mm, Ø 40mmOperating voltage 250V ACTemperature range -25° to +85°C

€17.85*

* Preise inkl. MwSt. zzgl. Versandkosten

Ballast choke for metal halide lamp HQI 70W YXXY

VG-SP070-SY

Modell: Modell SY

Magnetic choke for metal vapour discharge lamps or sodium vapour lamp 70 Watt.The ballasts were removed from new luminaires for conversion purposes and are unused.With temperature protectionOperating voltage 230 Volt / 50HzLamp current: 1.0ADelta t: 70 - 75°CBase plate with oblong hole and hole for screwing.Various manufacturers:1) Kanlux:Base plate with oblong hole and 2 holes for screwing.Dimensions: L 110mm, W 65mm, H 55mmFixing hole spacing: 2 x oblong hole 90-100mm2) VS Vossloh-Schwabe:Base plate with oblong hole and 2 holes for screwing.Dimensions: L 110mm, W 65mm, H 65mmMounting hole spacing: 2 x slotted hole 90-100mm3) YXXY:Base plate with oblong hole and 2 holes for screwing.Dimensions: L 115mm, W 65mm, H 55mmMounting hole spacing: 2 x slotted hole 95-105mm4) Shining:Base plate with oblong hole and 2 holes for screwing.Dimensions: L 115mm, W 65mm, H 52mmMounting hole spacing: 2 x slotted hole 95-105mm5) ERC:Base plate with oblong hole and 4 holes for screwing.Dimensions: L 90mm, W 65mm, H 55mmMounting hole spacing: 4 x slotted hole 55 x 60mm6) Accu:Base plate with slotted hole and 2 holes for screwing.Dimensions: L 110mm, W 65mm, H 55mmMounting hole spacing: 2 x slotted hole 85-95mm7) APF:Base plate with 6 x slotted hole and 4 holes for screwing.Dimensions: L 81mm, W 69mm, H 55mmMounting hole spacing: 2 x slotted hole 70mm8) TCI:Base plate with slotted hole and 2 holes for screwing.Dimensions: L 110mm, W 65mm, H 55mmMounting hole spacing: 2 x slotted hole 90-100mmTo operate the discharge lamp you need: choke, igniter and capacitor.

€22.61*

* Preise inkl. MwSt. zzgl. Versandkosten

Ballast choke for metal halide 150w

VG-SP150-VS

Modell: Modell VS

Universal KVG Ballast Choke for Metal Halide Lamp HSI, HID, HQI or SON, NAV Lamp 150 WMagnetic choke for metal vapour discharge lampor mercury vapour lamp 150 W.With temperature protection.As new, unused - removed from new headlamps for conversion purposes.24 months functional guarantee.Operating voltage: 230 Volt / 50HzLamp current: 1.8A?t: 70°CVarious manufacturers:1) Layrton:Base plate with oblong hole and 2 holes for screwing.Dimensions: L 135mm, W 65mm, H 55mmMounting hole spacing: 2 x oblong hole 116-125mmScrew terminals for the cables2) LGDD = Splendent:Base plate with oblong hole and 2 holes for screwing.Dimensions: L 145mm, W 66mm, H 54mmMounting hole spacing: 2 x slotted hole 122-134mmScrew terminals for the cables3) Carlo Bezzi:Base plate with oblong hole and 4 holes for screwing.Dimensions: L 113mm, W 73mm, H 60mmMounting hole spacing: 4 x slotted hole 90-96mmScrew terminals for the cables4) Tridonic ATCO:Base plate with slotted hole and 4 holes for screw fixing.Dimensions: L 110mm, W 65mm, H 48mmMounting hole spacing: 4 x slotted hole 55mmPlug-in terminals for the cables5) APF:Base plate with oblong hole and 2 holes for screwing.Dimensions: L 108mm, W 68mm, H 55mmMounting hole spacing: 2 x slotted hole 90-100mm and 4 x slotted hole 53-60mmPlug-in terminals for the cablesTo operate the discharge lamp you need: choke, igniter and capacitor.Wiring diagram: <http://info.dimmer.de/Vorschalt-HQI.pdf>

Variants from €23.80*

€29.75*

* Preise inkl. MwSt. zzgl. Versandkosten

Ballast Choke HID Sodium Lamp 250W

VG-SP250N-ERC

Modell: ERC

Magnetic choke for sodium vapour lamp or metal vapour lamp 250 Watt.With thermal protection.Operating voltage 230 Volt / 50HzLamp current: 3.0ATemp. diff.: 75°CBase plate with oblong hole and hole for screwing.Dimensions: L 130mm, W 85mm, H 75mmTo operate the discharge lamp you need: choke, igniter and capacitor.

€58.31*

* Preise inkl. MwSt. zzgl. Versandkosten

Ignitor for HPI 250w - 400w discharge lamp

VG-STA025

Pulse igniter for metal halide lamps 250W - 400W Operating voltage 220/240V 50/60Hz Ignition voltage 1.5 kV Loss 2.0W / 4.6AAmbient temperature -30° - +70°CPlastic housing Dimensions: Length 80mm, width 42mm, height 40mm.with threaded bolt M8

€14.28*

* Preise inkl. MwSt. zzgl. Versandkosten

Ignitor for MH / Sodium Lamp 70w - 400w round

VG-STA040

Superimposed ignitor for metal halide lamps HQI, HRI, HPI, HTI, HSI 35W ... 400Wand for sodium lamps SON, HSI, NAT, NAV 70W ... 400WOperating voltage: 220/240V 50/60HzIgnition voltage: 3.5 kV ... 4.5 kVLoss: 3.0W / 4.6AAmbient temperature: -20° - +70°CCylindrical aluminium housingDimensions:Length 80mmD 35mmwith threaded bolt M8 x 10mm

From €17.85*

* Preise inkl. MwSt. zzgl. Versandkosten

Details

Ignitor for 400 - 1000W discharge lamp 220V

VG-STA101

Superimposed ignitor for metal halide lamp or sodium vapour lamp 400W to 1000W.Operating voltage: 220 - 240 V, 50 - 60 HzOperating temperature: -30°C ... +55°CWith automatic switch-off in case of defective lamp.Lamp current: Max. 10.3AIgnition voltage 4.0 - 5.0 KVsLow-emission, rectangular plastic housing with M8 threaded stud.Dimensions: Width 48mm, H 38mm, L 87mm

€40.46*

* Preise inkl. MwSt. zzgl. Versandkosten

Ignitor 2 Wires for HPI-T2000

VG-STA200

For 2000W high pressure metal halid lamp.Operating voltage 220V - 240V AC 50/ 60Hz ignitor voltage 1.5 KVs

€46.41*

* Preise inkl. MwSt. zzgl. Versandkosten

Igniter HQI 1000-2000W 400V

VG-STA202

Superimposed ignitor for metal halide lamp 1000W - 2000W or sodium vapour lamp 600W - 1000W Operating voltage: 400 V (+10% / - 17.5%), 50 - 60 Hz Operating temperature: -30°C ... +55°C Very low power dissipation. Ignition voltage: 4.0 - 5.0 KVs Low emission Rectangular plastic housing with M8 threaded stud.Dimensions: Length 91mm (101mm with bolts and terminals). Width 50mm Height 37mm

€46.41*

* Preise inkl. MwSt. zzgl. Versandkosten

25 pieces Starters for fluorescent tube 4-65W

VG-STA70-25

Safe lamp start even at low ambient temperatures.Standard starter for single tube circuit. With interference suppression capacitor. To ensure safe lamp ignition, the starter should also be replaced each time the lamp is changed.

€17.85*

* Preise inkl. MwSt. zzgl. Versandkosten

Dummy Starter Bridge for LED Tube

VG-STA80

Material: Flame retardant polycarbonate Insulation resistance: > 3 MOhm With fuse: 1A This starter bridge is suitable for use with the LED tubes we sell. Only luminaires with CCG or CCG may be used, ECG luminaires are not suitable. Instructions: Switch off the power supply to the luminaire, remove old tube and old starter, Insert starter bridge and new LED tube and turn until it clicks into place. Switch on the luminaire again.Delivery only in packaging of 25 pieces. The bridges are included free of charge with the purchase of our LED tubes.

€1.19*

* Preise inkl. MwSt. zzgl. Versandkosten

Electronic Ballast G24q-2 CFL 1* 18W

VG-T118

From €26.18*

* Preise inkl. MwSt. zzgl. Versandkosten

Details

Professionelle Lichttechnik