Solar powered PV isle energy system for generating of 230 V AC voltage.
For use in regions without electricity.
To supply electrical energy even at night or under cloudy sky,
this system has an energy store with batteries.


Inverter:
Combined power supply for photovoltaic, mains and battery operation.
The battery charging can be done via the solar modules or via the power grid or an auxilliary diesel generator.
MPPT Maximum power point tracking adjusts the solar module voltage to the battery voltage for for up to 30% more power from the solar modules.
Overload and deep discharge protection for the batteries.
Output voltage: 230V
Single Phase: 50 -60Hz, auto-sensing
Pure sine wave
Maximum consumer load capacity: 3000VA / 2400W
Short-term peak load (starting current for motors): 3500 W
Efficiency: 98%
Short circuit protection and overload cut-off.
Standby power consumption only 2W
Temperature range: 0 - 55°C
Housing: Steel sheet painted
Dimensions: 600mm x 600 x 600mm

Solar panels:
Solar module power at sunshine: 2800 watts peak
Monocrystalline solar modules,
Power: 300Wp
Efficiency: 19%
Sealed and resistant to thunderstorm or hail.
Life expectancy approx. 25 years.
The high-quality solar cell technology has a high degree of efficiency and allows charging also at cloudy sky.
The required area for mounting the solar modules is about 21 square meters (e.g., 3m * 7m).

Energy storage:
Lithium iron phosphate 48V 100 ah longlife.
Capacity: 4.8 kWh
System voltage: 48V
Operating time with fully charged batteries 3 hours at 10A / 2300 watts of continuous consumption
(Or 12 hours at 625W).
The higher the consumption, the shorter will be the backup time.
Continuous operation 280W - 900W (average sampling day and night, depending on the weather, sun and region)
On request, the energy store is also available in smaller stages to reduce costs.


The system is delivered ready for connection and consists of the following components:
9 solar modules,
1 inverter floor box with included battery system
Mounting rails and brackets for installation of the solar panels on inclinated roofs. Other installation accessories on request.
Cables and terminals.
Assembly Instructions













The inverter is only for indoor use.
This system is also ideal for areas with frequently power shortages.
The modules truss system is for flat roof or for yard installation.
The energy yield roughly equivalent to the annual electricity consumption of a 1-family house with 3 persons in Egypt.