No lamp replacement for approx. 10 years, no maintenance costs, no reflectors to clean.The LEDs do not emit UV light, so hardly any insects are attracted.Pleasantly bright light, low glare, good visibility, long-lasting and safe in operation.LED power: 18WLED chip: Osram SMDLife expectancy: 100,000 hDue to the use of many small LEDs, the heat distribution is better and thus the life expectancy is extended.The brightness corresponds approximately to a 50W NAV sodium vapour lamp.Colour temperature: 4000K neutral white (from 10 pcs. also available in 3000K)Luminous flux: > 2500 LmCentral illuminance: > 28 Lux (4m height)Average luminous intensity: > 16 Lux (4m)Optics: NB - narrow beam - universal for roads with 2 lanes. (on request: WB-wide beam, for short poles, like pedestrian and bicycle paths)Recommended mast height: 3 - 6 mRecommended distance, mast to mast: 12 - 20mMast mounting: 48mm - 60mm top mount or side entryAdjustable inclination: -5 ~ +15 degProtection class: IP66Impact resistance: IK08Ambient temperature: -40°C ... +55°CLED operating current: 700mAPower consumption: 18WVoltage: 100 - 277V 50-60HzSurge protection: 6 kVPower factor: > 0.90Approval marks: CE & RoHSSpare parts guarantee on the E-block (driver) 20 yearsHousing Aluminium die-cast solid and very high quality, grey RAL7005Dimensions: 400mm x 200mm x 60mmTip: The widespread, old street lights with 40W fluorescent tube can be replaced by this LED luminaire. Likewise as a replacement for the mushroom luminaires with 125W HQL mercury vapour lamp. By replacing them, you will significantly save energy, maintenance costs and achieve better illumination.
Modern and elegant street lamp for bike path, parking, driveway, hiking trails, living areas.Including galvanized steel mast with 4 meter LPH.The mast has a lockable service door and a junction box with fuse.Dimensions: h1 length = 4000 mm / h2 soil = 600 mmIncluding LED lamp head: no maintenance costs, no reflectors clean.The LEDs emit no UV light, so little insects are attracted.Pleasant bright light, low glare, good visibility, durable and safe in operation.By using many small LEDs, the heat distribution is better and thus extends the life.LED power: 36W LED chip: Osram SMD Life expectancy: 100,000 h Due to the use of many small LEDs, the heat distribution is better and thus the life expectancy is extended. The brightness corresponds approximately to a 100W NAV sodium vapour lamp. Colour temperature: 4000K neutral white (from 40 pcs. also available in 3000K or 5600K) Luminous flux: > 5000 Lm Central illuminance: > 20 Lux (6m height) Average luminous intensity: > 10 Lux (6m) Optics: NB - narrow beam - universal for roads with 2 lanes. (on request: WB-wide beam, for short poles, like pedestrian and bicycle paths) Recommended mast height: 5 - 7 m Recommended distance, post to post: 18 - 26m Mast mounting: 48mm - 60mm top mount or side entry Adjustable inclination: -5 ~ +15 deg Protection class: IP66 Impact resistance: IK08 Ambient temperature: -40°C ... +55°C LED operating current: 700mA Power consumption: 36W Voltage: 100 - 277V 50-60Hz Surge protection: 6 kV Power factor: > 0.90 Approval marks: CE & RoHS Tip: The widespread, old street lights with 40W tube can be replaced by this LED light.Also as a replacement for the mushroom lights with 50W-80W HQL mercury vapor lamp.You save significantly energy, maintenance costs and achieve better illumination through the exchange.Delivery: Light Pole Hot-dip galvanized, (depending on order with powder coating)Mast adapter for mounting the lamp head on the mastLED lamp head, ready for use with connection cableCable junction box 16² with fuses and screws for mounting in the mast door
No lamp replacement for approx. 10 years, no maintenance costs, no reflectors to clean.The LEDs do not emit UV light, so hardly any insects are attracted.Pleasantly bright light, low glare, good visibility, long-lasting and safe in operation.Due to the use of many small LEDs, the heat distribution is better and thus the life expectancy is extended.LED: SMD chips Philips 160 Lm/WLife expectancy: 100,000h L90B10The brightness corresponds to 250W NAV = 250W HQL mercury vapour lamp.Colour temperature: 4000K neutral white (from 20 pcs. also available in 3000K or 5600K)Light distribution: 45° x 150Luminous flux: > 15500 LmCentral illuminance: > 26 Lux (9m height)Average luminous intensity: > 18 Lux (9m)Recommended mast height: 8 - 12mRecommended mast spacing: 30 - 40mMast mounting: Mast base or mast top 40mm - 60mm Adjustable inclination: 0 / 5 / 10/ 15 degrProtection class: IP66Impact resistance: IK08Ambient temperature: -40°C ... +45°CLED operating current: 700mAPower consumption: 105WVoltage: 198 - 254V 50-60HzPower factor: > 0.98Approval marks: CE & RoHSSpare parts availability guarantee on the E-block (driver) 20 yearsHousing die-cast aluminium solid and very high quality, grey RAL7005 (other colours on request)Dimensions: 537mm x 257mm x 82mmBy replacing the luminaire, you will significantly save energy, maintenance costs and achieve better illumination.
About 12 years no lamp replacement, no maintenance costs, no reflectors cleaning.This LED fixture can replace old streetlights with 125W or 200W HQL mercury vapor lamps or 150W hps sodium lamps.It saves lots of electrical energy, maintenance costs and reaches a better illumination.The LEDs don't emit any UV light, so there are almost no insects attracted.Pleasant bright, low-glare, high visibility, durable and reliable in operation.The brightness corresponds to 150W MH hps sodium or a 200W mercury vapor lamp.LED type: 80 pcs. Osram Power smd LED chip.Improved heat distribution by the use of many small LEDs wich extends the service life.Diesel generator suitable. The brightness remains constant even with fluctuating voltage.Luminous flux: > 8100 Lmmean lumens after 10000 h: - 5%Central illumination: > 39 Lux (8m height)Average illumination: > 23 Lux (8m)Color temperature: 4000K pure whiteRecommended mounting height : 8 - 12mRecommended distance from pole to pole: 30 - 40mPost top or side entry mounted. Pole: 60mm ØAdjustable fixture position 0 deg ... 90 degreeRated power: 90WOperating voltage: DC 24V, 20.4V ... 28.8VLED operating current: 350 mADegree of protection : IP65Impact resistance: IK10Ambient working temperature: -35°C ... +50C degreeCertification: CE & RoHSHousing: Aluminium die-cast in very high quality, gray RAL7005Dimensions: 650mm x 300mm
About 10 years no lamp replacement, no maintenance costs, no reflectors cleaning.The LED don't emit any UV light, so there are almost no insects attracted.Bright light with a wide beam shape, good visibility, durable and reliable in operation.Equivalent to 100W MH / sodium = 175W mercury lamp.LED power: 60WLED Chip: Power SMDInitial luminous flux: 7800lmCentral illumination: > 25 lux (6m)Average illumination: > 18 lux (6m)Color temperature: 6000K daylight whitePole height: 6 - 9mRecommended distance from pole to pole: 24 - 30mPost side entry mounted. Pole: 60mm ØFor pole top mount an additional adapter is available.Protection grade: IP65Environment temperature: -20°C ... +40°CLife time: aprx. 50.000 hVoltage: 85 - 265VRated power: 60 WPower factor > 0.98Surge protection: yesHousing: aluminium die-cast, greyDimensions: 425 x 150 x 65 mm
Ideal for street lighting, bicycle path lighting, pedestrian zones, parking, etc.Save energy, maintenance costs and provide better illumination.Quality fixture - made in EuropeBody: Pressure die-cast aluminum,Cover: 4mm toughened glassAdjustable bracket 180 degRecommended installation height: 8m - 12mOptical:LEDs: Samsung LH181BLuminous output: 19030 LmColour temperature: 4000K pure white, pleasantColor rendering: CRI > 80Life expectancy: 80,000h L80 B10 @ ta25, 50,000h L80 B20 @tamax.Available with different lens optics:PMMA street lens optics.Symmetric: Without optics for illuminating with maximum efficiency,asymmetrical: for large-area illumination of yard, park or facade,Street: Bi-symmetrical adapted to the elongated road.Cycle: Bike path optics adapted to the elongated and tall ways.Technical:Voltage: 220V-240V, 50Hz - 60HzPower consumption: 140WSurge protection: 6/8KvProtection degree: IP66 splashwater proofImpact resistance: IK10Temperature: -25° - +45°CWind load: 0.11m²Dimensions: L 395 mm, w 283, h 97 mmCertification: CE, RoHs, ENECOn request we deliver with a dimmable driver:DALI or midnight reductionDialux Files: LS-153-AS.IES LS-153-SM.IES LS-153-STR.IES LS-153-CYC.IES
An inexpensive luminaire that does not come from the Far East.No lamp replacement for approx. 12 years, no maintenance costs, no reflectors to clean.The LEDs do not emit UV light, so hardly any insects are attracted.Pleasantly bright light, low glare, good visibility, long-lasting and safe in operation.Trial lighting on request.The brightness corresponds to 50W NAV = 80W HQL mercury vapour lamp.LEDs: Samsung Power SMDLED luminous flux: 1780 LmEfficiency: 170 Lm/WLight colour: 2200K yellow ( on request also available in 3000K warm white, 4000K neutral white or 5700K daylight)Colour rendering: Ra >70Optics: PMMA anti-UV UL94 road lens optic, cycle path or footpath opticLife expectancy: 157,000h L80 B10 @ta25Ambient temperature: -35° to +50°CLED operating current: 700mAPower consumption: 12WVoltage: 220-240V 50/60HzPower factor: > 0.90Overvoltage protection: 6/8-10Kv can be ordered optionallyCentral illuminance: > 26 Lux (4m height)Average light intensity : > 12 Lux (4m)Recommended mast height: 4 - 7 mRecommended distance, pole to pole: 15 - 25mHousing, locking mechanism, cover and mounting block made of high-quality cast aluminium.Surface: Polyester powder coating anthracite RAL7039 (other colours on request)Mast mounting: base or mast top 60mmAngle adjustable from -5 degrees to +15 degreesConnecting plate: Easily removable nylon fibreglass support plate.Protective glass: Tempered 4mmTiltable in 4 steps up to 15 degree Protection class: IP66, splash-proof, class IIImpact resistance: IK08Wind load: 0.135m²Dimensions: L 500 mm, W 270 x H 88 mmCertifications: CE, ENEC, RoHSAlso dimmable at extra charge:Half light - With power reduction, switchable 50% - 100%,1-10V - Stepless dimmable,DALI - Infinitely digitally dimmable.Excellent cooling effect, as well as temperature sensor for very long service life.Spare parts guarantee on the E-block (driver) 20 years.Tip: The widespread, old street lights with 40W double tubes can be replaced by this LED luminaire.Likewise as a replacement for the mushroom luminaires with 80W HQL mercury vapour lamp or 50W sodium vapour lamp.By replacing them, you save significantly on energy, maintenance costs and achieve better illumination.
An inexpensive luminaire that does not come from the Far East.No lamp replacement for approx. 12 years, no maintenance costs, no reflectors to clean.The LEDs do not emit UV light, so hardly any insects are attracted.Pleasantly bright light, low glare, good visibility, long-lasting and safe in operation.Trial lighting on request.The brightness corresponds to 100W NAV = 160W HQL mercury vapour lamp.LEDs: Samsung Power SMDLED luminous flux: 8300 LmLuminaire Luminous flux: 6940 LmEfficiency: 170 Lm/WLight colour: 4000K neutral white (from 20 pieces also available in 2200K yellow, 3000K warm white, 5000K daylight)Colour rendering: Ra >80Optics: PMMA anti-UV UL94 road lens optic, cycle path or footpath opticLife expectancy: 157,000h L80 B10 @ta25Ambient temperature: -35° to +50°CLED operating current : 700mAPower consumption: 48WVoltage: 220-240V 50/60HzPower factor: > 0.90Overvoltage protection: 6/8-10Kv can be ordered optionallyCentral illuminance: > 30 Lux (6m height)Average light intensity: > 20 Lux (6m)Recommended mast height: 4 - 8 mRecommended distance, pole to pole: 20 - 28mHousing, interlock, cover and mounting block made of high-quality cast aluminium.Surface: Polyester powder coating anthracite RAL7039 (other colours on request)Mast mounting: base or mast top 60mmAngle adjustable from -5 degrees to +15 degreesConnecting plate: Easily removable nylon fibreglass support plate.Protective glass: Tempered 4mmTiltable in 4 steps up to 15Protection class: IP66, splash-proof, class IIImpact resistance: IK08Wind load: 0.135m²Dimensions: L 500 mm, W 270 x H 88 mmCertifications: CE, RoHSAlso dimmable at extra charge:Half light - With power reduction, switchable 50% - 100%,1-10V - Stepless dimmable,DALI - Infinitely digitally dimmable.Excellent cooling effect, as well as temperature sensor for very long service life.Spare parts guarantee on the E-block (driver) 20 years.Tip: The widespread, old street lights with 40W double tubes can be replaced by this LED luminaire.Likewise as a replacement for the mushroom luminaires with 160W HQL mercury vapour lamp or 100W sodium vapour lamp.By replacing them, you save significantly on energy, maintenance costs and achieve better illumination.
Despite the low power consumption, this lamp gives as much light as a 300 watt halogen lamp.Modern and elegant street lamp for bike path, parking, driveway, hiking trails, living areas.Including galvanized steel mast with 5 meter LPH and with additional extension with side boom.Luminaire mast, resistant to vandalism and environmental influences, hot dip galvanized, weather and corrosion resistantFor an extra charge additionally painted in any RAL color (powder-coated).The mast has a lockable service door and a junction box with fuse.With earth connectionDimensions mast:h1 visible length = 5000 mmh2 soil = 800 mmFoundation depth 90cmMast top end Ø = 60mm (optional 76mm)d2 foot Ø = 114 mmWall thickness s = 3 mmWith door 85 x 400 mm.Recommended distance, mast to mast: 18 - 30mIncluding LED lamp head:Approximately 12 years no lamp replacement, no maintenance costs, no reflectors clean.The LEDs emit no UV light, therefore attracting little insects.Pleasant bright light, low glare, good visibility, durable and safe in operation.LED power: 35WOsram Power LED Chip: 24 pieces.By using many small LEDs, the heat distribution is better and thus extends the life.The brightness corresponds to 50W NAV = 100W HQL mercury vapor lamp.Light color: 4000K neutral white (custom made 3000K or 5600K)Luminous flux: > 4475 LmOn request dimmable: 1-10V, DALI or half load circuitCentral illuminance:> 20 luxAverage light intensity:> 10 lux (at 20m mast spacing)Voltage: 100 - 277V 50-60HzProtection class: IP65Impact resistance: IK10Ambient temperature: -25 ° C ... + 45 ° CLED operating current: 700mAPower consumption 35WPower factor> 0.90Test mark: CE & RoHSSpare Parts Guarantee on the E-Block (Driver) 20 yearsHousing aluminum high quality, gray RAL7005Luminaire dimensions: L 590 mm x W 28.8 mm x H 20.5 mm.Wind load of the lamp: 0.150 m²Tip: The widespread, old street lights with 40W tube can be replaced by this LED light.Also as a replacement for the mushroom lights with 80W HQL mercury vapor lamp.You save significantly energy, maintenance costs and better illumination through the replacement.Delivery:Light Pole Hot-dip galvanized, (depending on order with powder coating)Mast adapter for mounting the lamp head on the mastLED lamp head, ready for operation with connection cableCable junction box 16² with fuses and screws for mounting in the mast door
Up to 60% reduced energy consumption.No lamp replacement for approx. 10 years, no maintenance costs, no reflector cleaning.Energy saving 210 Euro / year * at 10 h daily burning time compared to a frequently used 400W mercury vapour lamp.Savings of 2100 euros after 10 years of use, not including the savings on replacement lamps and the work involved.The LEDs do not emit UV light, so hardly any insects are attracted.Bright and wide illumination of large streets, squares and intersections.Long-lasting and safe in operation.LED power: 160WLED chip: Samsung SMD PowerExcellent cooling effect, as well as temperature sensor for very long service life.The brightness corresponds to 250W HQI / NAV = 400W HQL mercury vapour lamp.Luminous flux: 21500 LmEfficiency: 134 Lm/WCentral illuminance: > 42 Lux (12m height)Average luminous intensity: > 33 Lux (12m)Colour temperature: 4000K neutral whiteRecommended mast height: 10m - 15mRecommended distance, mast to mast: 35 - 45mMounting as mast base or mast top 60mmAngle adjustable mast mounting from 0 degrees to 90 degreesOperating voltage: AC 220V - 240V 50-60HzOvervoltage protection 6 kVTemperature monitoring with NTCLED operating current: 700mAPower consumption: 160 WPower factor > 0.90Ambient temperature: -35°C ... +45°CProtection class IP66, splash-proof.Impact resistance: IK10Wind load: 0.163m²Certifications: CE, RoHSDimensions: 600mm x 330mm x 125mmHousing die-cast aluminium solid and very high quality, grey RAL7039 (other colours on request)Spare parts guarantee on the E-block (driver) 20 years
Modern and elegant LED street lighting developed for urban and residential lighting. Suitable also for streets lighting, parking lots, yards and gardens. Developed to be used with high energy efficiency LED modules.LEDs: Samsung LH181BLuminous flux: 4475 lmLight color: 4000K neutral white (from 20 pieces also available in 2200K yellow, 3000K warm white, 5700K daylight)Color rendering: CCT > 80Optics: PMMA street lens optics with mean value at 30 ° (or bike path optics)Life expectancy: 109,000h L90 B10 @ ta25, 83,000h L80 B10 @tamax.Power consumption: 35WVoltage: 220-240V 50 / 60HzSurge protection: 6 / 8-10KvHousing, lock, cover and fixing block made of cast aluminum.Installation: 60mm mast attachment or attachmentAdapters for other mast diameters availableSurface: polyester powder coating in anthracite gray.Connection plate: Easily removable nylon fiberglass support plate.Protective glass: hardened 4mmTiltable in 4 steps up to 15 °Degree of protection: IP66 protected against water jets.Class IIImpact resistance IK10Wind load 0.213m²On request we deliver with a dimmable driver:1-10V, DALI or midnight reduction
No lamp replacement for approx. 10 years, no maintenance costs, no reflectors to clean.The LEDs do not emit UV light, so hardly any insects are attracted.Pleasantly bright light, low glare, good visibility, long-lasting and safe in operation.Due to the use of many small LEDs, the heat distribution is better and thus the life expectancy is extended.The brightness corresponds approximately to a 150W NAV sodium vapour lamp.Alternative available in the power ranges: 10W, 26W, 33W or 42W to 260WLED power: 80WLED chip: Osram SMDLife expectancy: 100,000 hColour temperature: 4000K neutral white (from 10 pcs. also available in 3000K)Luminous flux: > 10000 LmCentral illuminance: > 20 Lux (8m height)Average luminous intensity: > 10 Lux (8m)Optics: NB - narrow beam - universal for roads with 2 lanes. (on request: WB-wide beam, for short poles, like pedestrian and bicycle paths)Recommended mast height: 5 - 9 mRecommended distance, mast to mast: 18 - 32mMast mounting: 76mm top mount or side entryAdjustable inclination: -5 ~ +15 degProtection class: IP66Impact resistance: IK08Ambient temperature: -40°C ... +55°CLED driver: Philips - Dali and Sensor ready with D4i protocolLED operating current: 700mAPower consumption: 81WVoltage: 100 - 277V 50-60HzSurge protection: 6 kVPower factor: > 0.90Approval marks: CE & RoHSSpare parts guarantee on the E-block (driver) 20 yearsHousing Aluminium die-cast solid and very high quality, grey RAL7035Dimensions: 670mm x 310mm x 145mmTip: The old street lights with 150W - 175W mercury lamp can be replaced by this LED luminaire.By replacing them, you will significantly save energy, maintenance costs and achieve better illumination.
Modern and elegant street luminaire for general lighting and residential areas. Includes galvanised steel pole with 4 metre LPH.Recommended distance, pole to pole: 15 - 20m.Pole dimensions: h1 visible length: 4000 mmh2 ground: 800 mmPost top end Ø 60mm (optional 76mm)d2 Base Ø Approx. 114 mmWall thickness s Approx. 3 mmWith door 85 x 400 mmThe pole has a lockable service door.Luminaire head included: LEDs: LUXEON M by Philips Luminous flux: 4160 Lm Light colour: 4000K neutral white Power consumption: 36W Voltage: 230V 50HzHousing, latch, cover and mounting block: Cast aluminium. Surface finish: Polyester powder coating. Mounting: 60mm mast top or base. Mounting plate: Easily removable nylon fibreglass support plate.Protective glass: Tempered 4mm Folding reflector anodised and polished 99.85 pure aluminium. Tiltable in 4 steps up to 15 Protection class: IP66 waterproof. Class IIImpact resistance IK10Wind load 0.213m²Scope of delivery:Hot-dip galvanised luminaire pole, (with powder coating depending on order).Post adapter for mounting the lamp head on the post LED lamp head, ready for operation with connection cable.
Modern and elegant street luminaire for general lighting and residential areas.Includes galvanised steel pole with 6m LPH.Recommended distance, pole to pole: 18 - 28m.Steel pole:hot-dip galvanised according to DIN EN 40-4h1 visible length: 6000 mmh2 ground : 1000 mmMast top end Ø : 60mmd2 Base Ø : Approx. 114 mmWall thickness s : Approx. 3 mmThe mast has a lockable service door.Door : 85 x 400 mmExamples of mast distances: Distance 21,5m (13 Lux)Recommended foundation depth 110cmLuminaire head included:Optical features:Incl. Luxeon Power LEDsLumen luminous flux: 9515 LmPleasant colour temperature: 4000K neutral whiteLight distribution: Street: Bi-asymmetrical adapted to the elongated course of the street,(from 8 units also symmetrical, asymmetrical or with cycle path optic)Operating voltage: 230V 50 - 60HzPower consumption 70WHousing, latch, cover and mounting block: cast aluminium.Surface: Polyester powder coating.Mounting: 60mm mast top or attachmentMounting plate: Easily removable nylon fibreglass support plate.Protective glass: Tempered 4mmTiltable in 4 steps up to 15Protection class: IP66 water jet protected. Class IIImpact resistance IK10Wind load 0,213m²Dimensions: L 395 mm, W 283 x H 97 mmCertifications: CE, ENECScope of delivery:Lamp postPole adapter for mounting the lamp head on the poleLED lamp head, ready for use with connection cableDialux file: LS-151-STR.IES
Despite the low power consumption, this lamp gives as much light as a 500 watt halogen lamp.Including galvanized steel mast with a construction height of 7 metersThe mast has a lockable service door and a junction box with fuse.Steel mast S235 according to DIN EN 40-4.With door 85 x 400 mm.For mounting a floodlight or a street light.Dimensions: h1 length = 7000 mm / h2 soil = 1200 mmFoundation depth 130cmMast top end Ø = 76mmIncl. lighting head:no maintenance costs, no reflectors clean.The LEDs emit no UV light, so no insects are attracted.Pleasantly bright, low glare, easy to recognize, durable and safe in operation.LED power: 60WOsram Power LED Chip: 24 pieces.By using many small LEDs, the heat distribution is better and thus extends the life.The brightness is equivalent to 100W NAV = 125W HQL mercury vapor lamp.Light color: 4000K neutral white (custom made 3000K or 6000K)Luminous flux:5413 Lm at 6000K daylight white,4979 Lm at 4000K neutral white,Central illuminance: > 28 lux (6m height)Average light intensity:> 20 lux (6m)Recommended mast height: 6 - 10 mRecommended distance, mast to mast: 26 - 33mLateral mast holder 60mmProtection class: IP66Impact resistance: IK10Ambient temperature: -35 ° C ... + 50 ° COperating voltage: AC 100V - 260V 50-60HzPower consumption 68VAPower factor > 0.90Test mark: CE & RoHSSpare Parts Guarantee on the E-Block (Driver) 20 yearsHousing die-cast aluminum solid and very high quality, gray RAL7005 (other colors on request)Dimensions: 505mm x 339mm x 65mmDelivery:Light Pole Hot-dip galvanized, (depending on order with powder coating)Mast adapter for mounting the lamp head on the mastLED lamp head, ready for operation with connection cableCable junction box 16² with fuses and screws for mounting in the mast door
Recommended for building sites, mining, camps and parking lots.4 bright LED floodlights 100W, in adjustable, stable aluminium casing.Steel pole resistant to vandalism and environmental influences.Dip galvanized.Against surcharge the mast is painted with additional powder coating in any RAL colour.To DIN EN 40.With lockable door 85 x 400 mm.Mast for inground concreting.Dimensions:h1 length = 10000 mmInground length: 1500mmPole top Ø = 76mmd2 foot Ø = 191 mms material strength= 3 mmLuminous output: 45000 lumenThe brightness is like 4 halogen floodlights each 1000 watt.Light colour: 4000 K (pure white). on request other colours.Lighted area Ø aprx. 60 meterVoltage: 230V / 380V 50 - 60HzVery long maintenance-free system lifespan, by use of efficient LED lamps.20 Years sparepart availability guarantee.Protection degree lamp head: IP66Approvals: CE, RoHS, WEEE4 robust aluminium die-cast LED floodlight projectors, adjustable mounted.(Complete unit - all inclusive)* The pictures show samples with different sizes.