Eloxated aluminium reflector for extreme high light output (equivalent to 8500 watts halogen).Light distribution: Symmetrical or asymmetrical.Voltage: 400V /10 ampSuitable for mh discharge lamp 2000 watt E40, HRI-T or HQI-T E40 2000 Watt 8,8A.Start-up time aprx. 2 - 3 minutes.Lamp life time: Aprx. 8,000 hMax. cable length between ballast and light fixture: 15mBallast and lamp have to be ordered extra.Housing: Die-cast aluminum, gray coated.hardened protection glassAdjustable hanging bracket.Protection class: IP65Shock resistance: IK10Wind load: 0.375 m²Dimensions: Width 652 mm, height 576 mm, depth 303 mm
Eloxated aluminium reflector for extreme high light output (equivalent to 8500 watts halogen).Light distribution: Symmetrical or asymmetrical.Voltage: 400V /10 ampSuitable for mh discharge lamp 2000 watt E40, HRI-T or HQI-T E40 2000 Watt 8,8A.Start-up time aprx. 2 - 3 minutes.Lamp life time: Aprx. 8,000 hMax. cable length between ballast and light fixture: 15mBallast and lamp have to be ordered extra.Housing: Die-cast aluminum, gray coated.hardened protection glassAdjustable hanging bracket.Protection class: IP65Shock resistance: IK10Wind load: 0.375 m²Dimensions: Width 652 mm, height 576 mm, depth 303 mm
Robust construction, also suitable for emergency lighting or as stadium floodlight.Light cone 60Suitable for lamp HQI-T, HRI, HPI-T E40 1000 Watt 8,2ARun-up time approx. 2 - 3 minutes.Lamp life 8,000 h(Please order lamp and separate ballast separately.)Operating voltage 220 - 240V / 50Hz / 1000 WattHousing: die-cast aluminium, light grey coated.Hardened protective glass and temperature-resistant gasket.Protection class IP65 - splash-proof.Mounting by means of swivelling bracket.Dimensions: W 650mm, H 610mm
Suitable for lighting large squares, car parks, construction sites, etc.Can be used with the following lamps:High-pressure sodium lamp RNV-T, NAV-T, SON-T 1000W with excellent efficiency.The yellowish light emitted has a pleasant effect, is for better contrast vision, but has poor colour rendering properties.Or for the metal halide high-pressure lamp HSI, HPI-T E40 1000 Watt 8.2A for bright, white light with good colour recognition.(Please order lamp and separate ballast separately).Start-up time approx. 2 - 3 minutes.Lamp life 8,000 h. (Sodium vapour 12000 h)Operating voltage 220 - 240V / 50Hz / 1000 WattMax. Length of connecting cable between ballast unit and luminaire: 15mThe connecting cable to the 230V mains can be any length. Please note power losses with long cable lengths.Housing: die-cast aluminium, grey coated. With swivelling mounting bracket.Hardened safety glass and temperature-resistant seal.Protection class IP65 - splash-proof.Dimensions: W 650mm, H 700mm
Concentrated light beam 12° ( optional 35° ).Metal halide, for outdoor use.By the double sided lamp holder this fixture is shockproof and vibrationproof.GORE® Protective Vents system: supplied as standard.To be used with mh discharge lamp 2000 watt K12s-36.(Lamp not included)Operating voltage: 380V - 400V 50 HzIgniter box: Nylon fiber glass standard equipment, applied directly on the housing.The ballast gear has to be ordered extra.Housing: Aluminium die-cast, grey, with adjustable mounting bracket.Paintwork: Thermosetting polyester powder, prior degreasing and phos-phochromatizing process that will ensure an extremely high resistance to chemical and atmospheric agents.Bracket: 4 mm thickness shaped steel with hot-dip galvanizing final treat-ment.Reflector: Large pure aluminumGlass: Extra clear 5 mm tempered.Protection degree IP66Shock proof: IK10Ambient temperature: - 25 °C bis + 45 °CCertifications: ENEC, CEWind load: 0.206 m²Dimensions: Ø 505, L 520 mm, d 300 mm
Very bright luminary for adjustable mount on high poles or canopy.Very equal lighting on wide fields.With Meanwell LED driver and power stabilization for constant brightness, even at voltage fluctuations.Low power consumption, no maintenance costs, very long service life.Ready to install, including LED lamps.By the high number of power LED, there results a better heat dissipation in the fixture and an extended life time.LED Quantity: 288 pcsLamp Luminous Flux: 104,088 lmLight distribution: Asymmetric 55° or 20°, 30° or 45°Color temperature: 4000K (pure white)Color Rendering Index: CRI > 80Lamp Efficiency: 160 lm/WDimmable: On request available with 1-10V, DALI or DMX dimmingInput Voltage: AC 90 - 305VFrequency Range: 50 - 60HzPower Factor: 0.95Ambient temperature during operation: -20 Deg C ... +55 Deg CLED power: 720WLife time: 126,000hTotal power consumption: 740WAmbient humidity: 10% - 90%Very rigid aluminium die-cast casing with black finishing and adjustable mounting bracket.GORE® Protective Vents systemProtection grade: IP66 for outdoor and dustproofShockproof: IK05Approvals: TÜV, ENEC, CEDimensions: W 640mm * H 830mm * D 75mm, including mounting bracket 370mm
Very bright luminary for adjustable mount on high poles or canopy.Very equal lighting on wide fields.With Meanwell LED driver and power stabilization for constant brightness, even at voltage fluctuations.Low power consumption, no maintenance costs, very long service life.Ready to install, including LED lamps.By the high number of power LED, there results a better heat dissipation in the fixture and an extended life time.LED Quantity: 384 pcsLamp Luminous Flux: 147,800 lmLight distribution: Asymmetric 55° or 20°, 30° or 45°Color temperature: 4000K (pure white)Color Rendering Index: CRI > 80Lamp Efficiency: 160 lm/WDimmable: On request available with 1-10V, DALI or DMX dimmingInput Voltage: AC 90 - 305VFrequency Range: 50 - 60HzPower Factor: 0.95Ambient temperature during operation: -20 Deg C ... +55 Deg CLED power: 960WLife time: 126,000hTotal power consumption: 1000WAmbient humidity: 10% - 90%Very rigid aluminium die-cast casing with black finishing and adjustable mounting bracket.GORE® Protective Vents systemProtection grade: IP66 for outdoor and dustproofShockproof: IK05Approvals: TÜV, ENEC, CEDimensions: W 640mm * H 1110mm * D 75mm, including mounting bracket 370mm
Very bright luminary for adjustable mount on high poles or canopy.Light distribution: Asymmetric 130 deg * 80 deg, or symmetrical 80°, 100° or 120°Very equal lighting on wide fields.With Meanwell LED driver and power stabilization for constant brightness, even at voltage fluctuations.Low power consumption, no maintenance costs, very long service life.Ready to install, including LED lamps.By the high number of power LED, there results a better heat dissipation in the fixture and an extended life time.LED: SMD 5050Lamp Luminous Flux: 126,000 lmAverage Illuminance (with 85° x 135° lens)at 6 meters: 650 lux (10.9x28.9 meters)at 8 meters: 363 lux (14.6x38.6 meters)at 10 meters: 305 lux (18.2x46.5 meters)Color Rendering Index: CRI > 70Lamp Efficiency: 130 lm/WInput Voltage: AC 100 - 295VFrequency Range: 50 - 60HzPower Factor 0.9Ambient temperature: -25 Deg C ... +50 Deg CLED power: 1000WLife time 50000hTotal power consumption: 1020WAmbient humidity: 10% - 90%Color temperature: 5000K (daylight), on order available with 4000K or 6000KVery rigid aluminium die-cast casing with black finishing and adjustable mounting bracket.Protection grade IP65 for outdoor and dustproofDimensions: W 611mm * H 426mm * D 117mm, including mounting bracket 370mm
Very bright luminary for adjustable mount on high poles or canopy.Very equal lighting on wide fields.With Meanwell LED driver and power stabilization for constant brightness, even at voltage fluctuations.Low power consumption, no maintenance costs, very long service life.Ready to install, including LED lamps.By the high number of power LED, there results a better heat dissipation in the fixture and an extended life time.By the hexagon design of the cooling profiles, the wind load is reduced and the cooling of the LED modules is excellent.LED Quantity: 360 pcsLamp Luminous Flux: 115,200 lmLight distribution: 20°, 30° or 45°Color temperature: 5000K (daylight), on order available with 3000K, 4000K or 6000KColor Rendering Index: CRI > 80Lamp Efficiency: 160 lm/WDimmable: On request available with 1-10V, DALI or DMX dimmingInput Voltage: AC 100 - 277VFrequency Range: 50 - 60HzPower Factor: 0.95Ambient temperature during operation: -20 Deg C ... +55 Deg CLED power: 720WLife time: 100,000hTotal power consumption: 740WAmbient humidity: 10% - 90%Very rigid aluminium die-cast casing with black finishing and adjustable mounting bracket.Protection grade: IP67 for outdoor and dustproofShockproof: IK10Dimensions: W 690mm * H 460mm * D 75mm, including mounting bracket 370mm
Very bright luminary for adjustable mount on high poles or canopy.Very equal lighting on wide fields.With Meanwell LED driver and power stabilization for constant brightness, even at voltage fluctuations.Low power consumption, no maintenance costs, very long service life.Ready to install, including LED lamps.By the high number of power LED, there results a better heat dissipation in the fixture and an extended life time.By the hexagon design of the cooling profiles, the wind load is reduced and the cooling of the LED modules is excellent.LED Quantity: 540 pcsLamp Luminous Flux: 153,600 lmLight distribution: 20°, 30° or 45°Color temperature: 5000K (daylight), on order available with 3000K, 4000K or 6000KColor Rendering Index: CRI > 80Lamp Efficiency: 160 lm/WDimmable: On request available with 1-10V, DALI or DMX dimmingInput Voltage: AC 100 - 277VFrequency Range: 50 - 60HzPower Factor: 0.95Ambient temperature during operation: -20 Deg C ... +55 Deg CLED power: 960WLife time: 100,000hTotal power consumption: 1000WAmbient humidity: 10% - 90%Very rigid aluminium die-cast casing with black finishing and adjustable mounting bracket.Protection grade: IP67 for outdoor and dustproofShockproof: IK10Dimensions: W 690mm * H 690mm * D 75mm, including mounting bracket 370mm
Very bright luminary for adjustable mount on high poles or canopy.Light distribution: Asymmetric 130 deg * 80 deg, or symmetrical 80°, 100° or 120°Very equal lighting on wide fields.With Meanwell LED driver and power stabilization for constant brightness, even at voltage fluctuations.Low power consumption, no maintenance costs, very long service life.Ready to install, including LED lamps.By the high number of power LED, there results a better heat dissipation in the fixture and an extended life time.LED: SMD 5050Lamp Luminous Flux: 126,000 lmAverage Illuminance (with 85° x 135° lens)at 6 meters: 650 lux (10.9x28.9 meters)at 8 meters: 363 lux (14.6x38.6 meters)at 10 meters: 305 lux (18.2x46.5 meters)Color Rendering Index: CRI > 70Lamp Efficiency: 130 lm/WInput Voltage: AC 100 - 295VFrequency Range: 50 - 60HzPower Factor 0.9Ambient temperature: -25 Deg C ... +50 Deg CLED power: 1000WLife time 50000hTotal power consumption: 1020WAmbient humidity: 10% - 90%Color temperature: 5000K (daylight), on order available with 4000K or 6000KVery rigid aluminium die-cast casing with black finishing and adjustable mounting bracket.Protection grade IP65 for outdoor and dustproofDimensions: W 611mm * H 426mm * D 117mm, including mounting bracket 370mm
Light beam: 35° Metal halide, for outdoor use.By the double sided lamp holder this fixture is shockproof and vibrationproof.GORE® Protective Vents system: supplied as standard. To be used with mh discharge lamp 2000 watt K12s-36. (Lamp not included)Operating voltage: 380V - 400V 50 Hz Igniter box: Nylon fiber glass standard equipment, applied directly on the housing.The ballast gear has to be ordered extra. Housing: Aluminium die-cast, grey, with adjustable mounting bracket.Paintwork: Thermosetting polyester powder, prior degreasing and phos-phochromatizing process that will ensure an extremely high resistance to chemical and atmospheric agents.Bracket: 4 mm thickness shaped steel with hot-dip galvanizing final treat-ment.Reflector: Large pure aluminum Glass: Extra clear 5 mm tempered. Protection degree IP66 Shock proof: IK10 Ambient temperature: - 25 °C bis + 45 °C Certifications: ENEC, CE Wind load: 0.206 m² Dimensions: Ø 505, L 520 mm, d 300 mm
€593.81*
* Preise inkl. MwSt. zzgl. Versandkosten
This website uses cookies to ensure the best experience possible. More information...