This attachment is slipped onto the top of the mast.Fixing with the enclosed Allen screws.Luminaire mount 60mmBracket length each: 400mm(arrangement 180°, other angles on request)For mast diameter 76mmAngle of inclination 15Material: hot-dip galvanised steelScrews stainless steel A2Powder coatings, as well as special sizes and other boom lengths available on request.Maximum weight per street light 15kg (higher weights on request).Cables can be pulled directly through the outriggers into the masts.A support guard is built in to prevent the cables from shearing off.
Boom length 500mmMaximum weight per street light 15kg (higher weights on request).For pole diameter 76mmLuminaire mounting: 60mmArm arrangement: 120°Angle of inclination: 15Cable feed-through possible into the mastMaterial:Steelgalvanised (coated in any RAL colour at extra charge)With VA screws for pole mountingResistant to vandalism and environmental influences.
This attachment is slipped onto the top of the mast.Fixing with the enclosed Allen screws.Luminaire mount 50mmBracket length each: 400mmArrangement: 180°, other angles on requestFor mast diameter: 76mmAngle of inclination 15Material: hot-dip galvanised steelScrews stainless steel A2Powder coatings, as well as special sizes and other bracket lengths available on request.Maximum weight per street light 12kg (higher weights on request).Cables can be pulled directly through the outriggers into the masts.A support guard is built in to prevent the cables from shearing off.
Up to 2 spotlights can be mounted.Suitable for masts with spigot Ø 60mm or 76mm.Cable routing into the mast top via 2 holes.Width 60cmwith 2 holes 10mm (40cm distance) and centre hole 10mmMaterial:SteelHot-dip galvanised (coated in any RAL colour at an extra charge)With VA grub screws for fixing to the poleResistant to vandalism and environmental influences. .
2 headlamps can be mounted.Maximum weight per spotlight 12kg (higher weights on request).Total width 80cmWith lateral angles for wobble-free mounting of one floodlight each.Arrangement 180° (other angles on request)The angles have a central hole 13mm, as well as 2 x hole 10mm with 140mm spacing. Suitable for poles with spigot Ø 60mm or 76mm.Material:SteelGalvanised (coated in any RAL colour at an extra charge)With VA grub screws for fixing to the poleResistant to vandalism and environmental influences.
3 headlamps can be mounted.The maximum weight per spotlight is 12kg (higher weights on request).Width 80cm3x hole 13mm per side plateSuitable for poles with top end Ø 76mmMaterial:SteelGalvanised (coated in any RAL colour at extra charge)With VA grub screws for fixing to the poleResistant to vandalism and environmental influences.
Width 120cmMaximum weight per spotlight 12kg (higher weights on request)With 4x hole 12mmSuitable for poles with top end Ø 76mmMaterial:SteelGalvanised (coated in any RAL colour at an extra charge)With VA screws for pole mountingResistant to vandalism and environmental influences.
Dimensions:Width: 2400 mmLoad capacity: 30kg per fixtureMast spigot diameter: 108mm (other diameters on request)Boreholes: 4x 14mm for floodlight mountingMaterial:SteelGalvanised (coated in any RAL colour at extra charge)With VA screws for mast mountingResistant to vandalism and environmental influences.
Dimensions:Width: 2400 mmLoad capacity: 30kg per fixtureMast spigot diameter: 108mm (other diameters on request)Boreholes: 4x 14mm for floodlight mountingMaterial:SteelGalvanised (coated in any RAL colour at extra charge)With VA screws for mast mountingResistant to vandalism and environmental influences.
Width 120cmMaximum weight per spotlight 12kg (higher weights on request)With 2x hole 12mmSuitable for poles with top end Ø 76mmMaterial:SteelGalvanised (coated in any RAL colour at extra charge)With VA screws for pole mountingResistant to vandalism and environmental influences.
3 headlamps can be mounted.The maximum weight per spotlight is 12kg (higher weights on request).Extension arm length each 50cm/ arrangement 120°(other angles on request)3x hole 13mm per side plate with standard hole pattern (140mm hole spacing + centre hole)Suitable for masts with top end Ø 60mm or 76mmMaterial:SteelGalvanised (coated in any RAL colour at an extra charge)With VA grub screws for fixing to the poleResistant to vandalism and environmental influences.
4 spotlights with max. 12Kg each can be mounted.Extension arm length 50cm eachEach side plate has 3x holes with standard hole pattern (centre 13mm, + each 7cm with 10mm).For lighting car parks and other large areas.Suitable for poles with top end Ø 76mm or 60mm.Material:SteelGalvanised (coated in any RAL colour at an extra charge)With VA threaded pins for fixing to the poleResistant to vandalism and environmental influences.With pigeon protection spikes at an extra charge
Slightly inclined upwards (15°) for angled radiation away from the building. Robust, hot-dip galvanised design from our own production. (Painting, special colour in Ral, as well as other angles and lengths possible on request). Ø 60 mm (other diameters possible as special order)Width 130mm, height 210mm, length of the socket 200mm4x hole for wall mounting 12mm (hole spacing 95x175mm)Cable feed-through in the middle with 25mm or below the pipe socket with 10mmFor street lights up to max. 25kg
Particularly stable mounting possibility of a street lamp.Mounting on a flat house wall.Material: Steel welded hot-dip galvanized.Slightly inclined (15°) towards oblique radiation away from the building.Length: 1000mmSuitable for street lights up to 15kg4x wall mounting hole 12mm (hole distance 95x175mm)Diameter: Ø 60 mm (Other Ø, varnish, special colour possible on request)
Particularly stable mounting option of a street lamp.Mounting on a flat house wall.Material: welded steel galvanizedSlightly tilted upwards 15° for oblique radiation away from the building.Length: 1000mmDiameter: Ø 60 mm(Painting, special color upon request)
Optionally available for poles with 76mm, 98mm or 108mm braid diameterstable mast sleeve with corresponding hole pattern and cable entry into the mastincl. 4 fixing screws and 2 fixing screws in stainless steel for the sleeve and the flooderMaterial steel hot-dip galvanized.Maximum weight of headlamps: 50kg
This fastener is attached from above over the mast and at any heightfixed with the enclosed Inbus screws.Luminaire mounting 60mmBoom length: 200mmMaterial: hot-dip galvanized steelScrews stainless steel A2Powder coatings, as well as special sizes and other boom lengths available on request.There is 1 hole as a cable outlet at the lower end of the boom.
This fastener is attached from above over the mast and at any heightfixed with the enclosed Inbus screws.Luminaire mounting 60mmBoom length: 200mmMaterial: hot-dip galvanized steelScrews stainless steel A2Powder coatings, as well as special sizes and other boom lengths available on request.There is 1 hole as a cable outlet at the lower end of the boom.
This fastener is attached from above over the mast and at any heightfixed with the enclosed Inbus screws.Luminaire mounting 60mmBoom length: 200mmMaterial: hot-dip galvanized steelScrews stainless steel A2Powder coatings, as well as special sizes and other boom lengths available on request.There is 1 hole as a cable outlet at the lower end of the boom.
This fixture consists of 2 parts and is fixed to the side of the pole at any height.Luminaire mount 60mmBracket length: 200mmMaterial: hot-dip galvanised steelScrews: stainless steel A2Inclination: approx. 10Powder coatings, special sizes and other bracket lengths available on request.There is 1 hole as cable outlet at the lower end of the bracket, as well as a hole in the clamp for direct cabling into the mast.
