For mobile power supply or photovoltaic solar systems.For lighting, small TV, fan. Not suitable for music systems.Note: Due to the very high battery currents, the battery cable should be as short as possible.Please use the original cable supplied.The 230V cable to the consumer may be longer.Use an inverter with a slightly higher continuous power to have a small reserve for changing loads. Continuous load 150 WPeak load 300 W only at the moment of switch-on.Output voltage 230V +-5%Frequency: 50 Hz +-0.05%, modified sine waveInput: 12V (or variant 24V) via terminals (e.g. car battery).Input voltage: 10-15 VOutput via Schuko socket.Modified sine wave, low power consumption.Alarm and LED display in case of overload or low battery charge.Battery cut-off: below 9.5 / 19.5 VCooling by cooling profile housingFuse: 1 x 15 ACompact aluminium housing: L 165mm, W 94mm, H 69mm.
For mobile power supply or photovoltaic solar systems.For lighting, TV, fan. Not suitable for music systems.Note: Due to the very high battery currents, the battery cable should be as short as possible.Please use the original cable supplied.The 230V cable to the consumer may be longer.Use an inverter with a slightly higher continuous power to have a small reserve for changing loads.Continuous load 300 WPeak load 1000 W only at switch-on moment.Output voltage 230V 50 Hz, modified sine wave.Available for 12V or 24V battery voltage.Connection via terminals (e.g. car battery).Output via Schuko socket.With DC fan cooling for continuous operation.Short-circuit protection and overload circuit.Compact aluminium housing: L 180mm, W 90mm, H 55mm
For mobile power supply or photovoltaic solar systems.For lighting, refrigerator, TV, fan. Not suitable for music systems.Note: Due to the very high battery currents, the battery cable should be as short as possible.Please use the original cable supplied.The 230V cable to the consumer may be longer.Use an inverter with a slightly higher continuous power to have a small reserve for changing loads. Continuous load 600 WPeak load 1200 W only at the moment of switch-on.Output voltage 230V 50 Hz, modified sine waveInput 12V or 24V via terminals (e.g. car battery)Output via Schuko socket.With DC fan cooling for continuous operation.Short-circuit protection and overload circuit.Compact aluminium housing: L 200mm, W 80mm, H 64mm
Inverter for photovoltaic systems or battery operation for mobile power supply, in motor vehicles or photovoltaic solar systems.Suitable for all types of electrical and electronic devices, including music systems.Please note that many devices require a very high, short-term inrush current.Note: Due to the very high battery currents, the battery cable should be as short as possible.Please use the original cable supplied.The 230V cable to the consumer may be longer.Use an inverter with a slightly higher continuous power to have a small reserve for changing loads.Continuous load 600 WPeak load 1000 W only at switch-on momentOutput voltage 230V 50 HzPure sinusoidal distortion factor max. 3%Input 12V (optionally 24V) via terminals (e.g. car battery)Battery current: 44A(88A) at 12V.Efficiency 85 - 90%Output via Schuko socket.No-load consumption 0.8A / 27.0VDimensions: 300 x 179 x 81mm
For mobile power supply, in cars or photovoltaic solar systems.For lighting, refrigerator, TV, fan. Not suitable for music systems.Note: Due to the very high battery currents, the battery cable should be as short as possible.Please use the original cable supplied.The 230V cable to the consumer may be longer.Use an inverter with a slightly higher continuous power to have a small reserve for changing loads.Continuous load 1000 WPeak load 2000 W only at switch-on momentOutput voltage 230V 50 Hz, modified sine waveInput 12V (optionally 24V) via terminals (e.g. car battery)Battery current: 44A(88A) at 24V or 88A(176A) at 12V.Output via Schuko socket.With DC fan cooling for continuous operation.Short-circuit protection and overload circuit.Housing: aluminium L 425mm, W 200mm, H 78mm
Inverter for photovoltaic systems or battery operation.Suitable for all types of electrical and electronic devices, including music systems.Please note that many devices require a very high, short-term inrush current.Note: Due to the very high battery currents, the battery cable should be as short as possible.Please use the original cable supplied.The 230V cable to the consumer may be longer.Use an inverter with a slightly higher continuous power to have a small reserve for changing loads.Continuous load 2000 wattsPeak load: 2500 watts at the moment of switch-on onlyOutput voltage 230V 50 HzOutput via Schuko socket.Pure sinusoidal distortion factor max. 3%.Input 24V (optionally 12V) via terminals (e.g. car battery)Efficiency 90%No-load consumption 0.8A @ 27.0VDimensions: 413 x 278 x 102mm
€668.78*
* Preise inkl. MwSt. zzgl. Versandkosten
This website uses cookies to ensure the best experience possible. More information...