Robust PV street light with LED lamp - no power connection required

Recommended for countries with average solar radiation, such as Europe, Ukraine, New Zealand.

High luminous intensity thanks to state-of-the-art SMD LED in combination with electronic 12V-60V DC PWM driver.

Intelligent microprocessor system control.

Design, manufacture and quality management in Germany.

The solar light is maintenance-free - only the solar module should be cleaned occasionally with water.

All brackets and fixings are hot-dip galvanized (powder-coated as required at an extra charge).

All screws are made of stainless steel.

General technical data:

Illuminated area: approx. 20 x 10m

Recommended pole spacing: approx. 15 - 24 meters

Ambient temperature: -20°C ~ +50°C (extension -35°C ~ +65°C possible on request)

Protection class: III safety extra-low voltage

Test mark:                          CE, RoHS, WEEE

20-year availability guarantee for spare parts.

Luminaire head specification:

Robust LED luminaire head made of die-cast aluminum

LED lamp: SMD chipset

LED power: 25W

Energy efficiency class C

Light color 4000K neutral white 

Light distribution: Street light optics (with symmetrical or asymmetrical lens optics at an extra charge) 

No UV radiation for reduced insect attraction

LED efficiency: > 160 lm/w

Luminaire efficiency: > 145 lm/w

Luminous flux lumen: 3500 Lm

Central illuminance: > 10 lux (5m height)

LED service life: approx. 80,000 hours

Protection class: IP65 (protected against water and storms).

Impact resistance: IK10

Warranty 5 years

Luminaire control:

Smart microprocessor control with wireless programming option.

Readout of the current operating status with storage of measurement data for all components from the last few days.

Automatic switch-on at sunset and switch-off at sunrise. (Switching level adjustable) 

The light can be set to an output of 10-30% throughout the night (from dusk) or in 5 time blocks (1-15 hours).

If a person enters the detection range of the motion detector (approx. 15m, 360°), the LED lamp is switched to 50-100% power, depending on the setting 1-10min.

Due to the long winter months, the total of the time blocks should be at least 15 hours. The LED is switched on by the set night light detection threshold (voltage drop on the PV module).

The light is also switched off at sunrise by the set night light detection threshold (voltage build-up on the PV module, the time blocks are ended).

Example 1: From dusk 4 hours with 10% ambient lighting, with motion detector contact 100%, rest of the night (approx. 10 hours) ambient lighting 0% and motion detector contact 70%

Example 2: 4 hours 10% ambient lighting, 100% with motion detector contact, then 6 hours only with motion detector contact 50%, rest of the night again 4 hours 10% ambient lighting, 100% with motion detector contact

Example 3: All night (15 hours) at 10%, 100% with motion detector contact

The charge controller is also equipped with a Smart Power function that enables automatic dimming at night depending on the battery charge level.

If the battery voltage falls below 50%, the lamp is automatically dimmed to 50%; this process is descending until the deep discharge protection kicks in.

This setting enables safe operation even on low-light days in winter.

The charge controller settings are preset by us according to customer requirements.

If you would like to change the settings, you will need the S-SOLS29-5 remote control.

We will be happy to help you decide on the correct default settings.

All functions are pre-programmed by us free of charge, depending on the project and customer requirements, so that the light is ready for operation immediately after installation.

Temperature-optimized battery charging and trickle charging to protect the batteries.

Overvoltage and deep discharge protection for battery.

Reverse polarity and short-circuit protection.

Additional fuse

Protection class: IP66

Warranty: 5 years

Motion detector:

Microwave sensor

Detection angle 360°

Range up to 12m 

Solar module specifications:

Monocrystalline silicon with very high efficiency

Hardened protective glass, hail-resistant

This high-quality module technology also guarantees charging in overcast conditions. On dark days in winter, recharging is limited, which shortens the lighting time.

Efficiency: 19%

Output: 180Wp 

Life expectancy: approx. 25 years

Performance guarantee * 20 years 80% / 10 years 90%

* Excluding mechanical impact

Battery storage:

Battery: Lithium iron phosphate LiFePo4 12V,

maintenance-free, long-life, for solar cycle operation

Service life approx. 8 - 12 years / 20°C

Function even at low temperatures.

Self-sufficient operating time in cloudy weather (with fully charged battery):

Winter: 80 hours (approx. 8 days)

The batteries are located in the mast, behind the lockable door.

Mast:

Steel mast, hot-dip galvanized,

Visible height: 5 m

Ground section: 80 cm for setting in concrete

(4m - 8m height also available on request)

For easier erection, we also offer installation sleeves into which the pole can be inserted.

Lockable mast door for easy access to the control unit

Pole:

Steel mast, hot-dip galvanized,

Visible height: 5 m

Ground section: 80 cm for setting in concrete

(4m - 8m height also available on request)

For easier erection, we also offer installation sleeves into which the pole can be inserted.

Lockable mast door for easy access to the control unit.

Supplied disassembled with the following components:

LED lamp head with pole mounting

Luminaire control unit (already mounted in the luminaire head)

Solar module with stable pole mounting

Steel pole, with connection box and solar battery (already installed)

Illustrated assembly instructions in German or English.

All components are pre-wired and prepared for quick assembly.