Despite the low power consumption, this lamp gives as much light as a 300 watt halogen lamp.
Modern and elegant street lamp for bike path, parking, driveway, hiking trails, living areas.
Including galvanized steel mast with 5 meter LPH and with additional extension with side boom.
Luminaire mast, resistant to vandalism and environmental influences, hot dip galvanized, weather and corrosion resistant
For an extra charge additionally painted in any RAL color (powder-coated).
The mast has a lockable service door and a junction box with fuse.
With earth connection

Dimensions mast:
h1 visible length = 5000 mm
h2 soil = 800 mm
Foundation depth 90cm
Mast top end Ø = 60mm (optional 76mm)
d2 foot Ø = 114 mm
Wall thickness s = 3 mm
With door 85 x 400 mm.
Recommended distance, mast to mast: 18 - 30m

Including LED lamp head:
Approximately 12 years no lamp replacement, no maintenance costs, no reflectors clean.
The LEDs emit no UV light, therefore attracting little insects.
Pleasant bright light, low glare, good visibility, durable and safe in operation.
LED power: 35W
Osram Power LED Chip: 24 pieces.
By using many small LEDs, the heat distribution is better and thus extends the life.
The brightness corresponds to 50W NAV = 100W HQL mercury vapor lamp.
Light color: 4000K neutral white (custom made 3000K or 5600K)
Luminous flux: > 4475 Lm
On request dimmable: 1-10V, DALI or half load circuit
Central illuminance:> 20 lux
Average light intensity:> 10 lux (at 20m mast spacing)
Voltage: 100 - 277V 50-60Hz
Protection class: IP65
Impact resistance: IK10
Ambient temperature: -25 ° C ... + 45 ° C
LED operating current: 700mA
Power consumption 35W
Power factor> 0.90
Test mark: CE & RoHS
Spare Parts Guarantee on the E-Block (Driver) 20 years
Housing aluminum high quality, gray RAL7005
Luminaire dimensions: L 590 mm x W 28.8 mm x H 20.5 mm.
Wind load of the lamp: 0.150 m²

Tip: The widespread, old street lights with 40W tube can be replaced by this LED light.
Also as a replacement for the mushroom lights with 80W HQL mercury vapor lamp.
You save significantly energy, maintenance costs and better illumination through the replacement.

Delivery:
Light Pole Hot-dip galvanized, (depending on order with powder coating)
Mast adapter for mounting the lamp head on the mast
LED lamp head, ready for operation with connection cable
Cable junction box 16² with fuses and screws for mounting in the mast door